TV Mounting Bracket - Electrovision - Black

No, this bracket is designed for installation on solid walls only (e.g., brick or concrete). Mounting on plasterboard without hitting a stud can be unsafe and is not recommended.

The bracket can support a maximum weight of 60kg.

This bracket is designed for screen sizes from 37 inches to 80 inches. It may not be suitable for TVs smaller than 37 inches.

The bracket has a profile of 40mm, meaning your TV will sit approximately 40mm away from the wall when fully retracted.

Yes, this bracket is specifically designed to accommodate curved TVs, particularly when mounted in an inverted position for a flush fit.

The bracket offers a swivel range of up to 90 degrees in each direction, totaling 180 degrees.

The bracket comes with hardware for mounting to a solid wall and for attaching the TV to the bracket. However, you may need specific wall anchors depending on your wall type. Always use fixings appropriate for your wall.

Check that all wall mounting bolts are securely tightened into the solid wall. Ensure the wall itself is structurally sound and capable of holding the weight. If using a stud wall, confirm the bolts are anchored into the studs.

Most brackets allow for minor leveling adjustments. Check the bracket's pivot points for any locking screws or mechanisms that might need adjustment to ensure the TV is horizontal.

Ensure the TV is within the compatible screen size and weight limits. Check that the swivel and tilt mechanisms are not obstructed and that all locking bolts for the adjustments are loosened appropriately before attempting to move the TV.

Route cables loosely through the designated channels before fully tightening the TV to the bracket. Use cable ties sparingly to group cables neatly within the channels.

Verify that your TV's VESA pattern is within the 600x400mm maximum supported by this bracket. If the TV's VESA is smaller, adapter plates or different mounting arms might be required, which are not included.