Living and Home Wall Sticker - Grey

The wall sticker is made from high-quality PVC.

Yes, you can carefully lift and reposition the sticker shortly after application if you make a mistake, provided the surface remains clean.

When removed carefully from a properly painted surface, it should not leave any residue or damage. However, results may vary on delicate or old paint.

It can be used in kitchens for backsplashes if applied to a smooth, non-porous surface. Avoid direct contact with excessive steam or water, as it may affect adhesion over time.

It adheres best to smooth, clean, and dry surfaces such as painted walls, glass, metal, and finished wood. Avoid textured or uneven surfaces.

Wipe gently with a damp cloth. Avoid harsh chemicals or abrasive cleaners.

Product dimensions are not specified in the provided information. Please refer to the product packaging or retailer for exact measurements.

Ensure the wall surface is completely clean, dry, and smooth. Re-apply pressure, smoothing from the center outwards. If the surface is textured, the sticker may not stick effectively.

Gently lift the edge of the sticker where the bubble is located and re-apply, smoothing out the air with a soft cloth or squeegee. For small bubbles, a pinprick may release trapped air.

Ensure all edges are firmly pressed down. If the surface has a slight texture, a small amount of wallpaper adhesive applied very sparingly to the edge might help, but use with caution to avoid damaging the wall upon removal.

Gently warm the sticker with a hairdryer on a low setting from a distance. This can help soften the adhesive. Peel slowly and carefully at a shallow angle.