This Draper air compressor is suitable for workshop and site use. It features a V-twin-cylinder ca...This Draper air compressor is suitable for workshop and site use. It features a V-twin-cylinder cast iron pump with thermal motor protection overload, an on/off pressure switch, a pressure regulator, and a pressure gauge. It also includes two quick euro coupling outlets, wheels, and a transport handle. Specifications include a 100L tank size, a 2.2kW (3.0HP) motor, 14.6cfm (412L/min) air displacement, 8.0cfm (227L/min) free air delivered (FAD), 13A input current, 2850rpm speed, and a maximum pressure of 116psi (8bar). The dimensions are 110.00cm x 39.00cm x 79.00cm and it weighs 50.86kg.
This guide is for users of the Draper Air Compressor (100L, 2.2kW model). It helps you understand the features and how to get the most out of your compressor for workshop and site applications. Note that the size and weight require adequate space and consideration for transport.
All features
Model Part Number
65396
Brand
Draper
Extended Product Information
FAQs
How often should I drain the tank?
Drain the tank after each use or at least once a day to prevent rust and corrosion.
What type of oil should I use?
Consult the user manual for the recommended oil type. Typically, a non-detergent air compressor oil is used.
How do I check for air leaks?
Apply soapy water to connections and fittings. Bubbles indicate a leak.
What is the purpose of the thermal overload protector?
It protects the motor from overheating and damage.
What safety precautions should I take?
Always wear safety glasses. Ensure the work area is well-ventilated, and never exceed the maximum pressure rating of the compressor or the tools.
How do I replace the air filter?
Consult the user manual for filter type and replacement instructions.
Can I use an extension cord?
Use a heavy-duty extension cord of the correct gauge to avoid voltage drop.
Troubleshooting
Compressor does not start.
Check the power supply, ensure the switch is on, and inspect the thermal overload protector.
Compressor runs but does not build pressure.
Check for leaks in the hoses and fittings. Inspect the pressure switch and the check valve.
Compressor runs continuously.
Check for leaks or if the pressure switch is faulty.
Low air pressure.
Ensure the regulator is set correctly. Check for leaks in the system.
Pros and Cons
Pros
Durable cast iron pump for extended life.
Thermal overload protection safeguards the motor.
Adjustable pressure for different tool requirements.
High air displacement for demanding applications.
Large tank capacity reduces the frequency of compressor cycling.
Cons
The unit's weight (50.86kg) makes it challenging to move.
Requires a 13A power supply.
Physical size may limit use in smaller workspaces.
Requires regular maintenance to ensure optimal performance.
Setup, Compatibility & Care
Placement: Place the compressor on a level, stable surface.
Power: Connect to a 230V, 13A power outlet.
Pressure Adjustment: Use the regulator to set the desired output pressure.
Compatibility: This compressor is compatible with a wide range of air tools that operate within its pressure and flow specifications.
Care:
Regularly drain the tank to prevent corrosion.
Check the oil level (if applicable) and top up as needed.
Clean or replace the air filter regularly.
Inspect hoses and fittings for leaks.
Follow the manufacturer's instructions for the specific maintenance intervals.