Kenable CAT6 Ethernet Cable - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Kenable CAT6 Ethernet Cable in black is designed for users seeking reliable Gigabit network performance at an economical price. It features 4 unshielded twisted pairs for efficient data transfer, making it suitable for general network connectivity. However, it's important to note that this cable uses CCA (Copper Clad Aluminum) and is not recommended for Power over Ethernet (PoE) applications due to potential heating issues.
All features
| Series | CAT6 |
|---|---|
| Model Part Number | C6-CCA |
| Brand | kenable |
Extended Product Information
FAQs
What is the difference between CAT6 and CAT5e?
CAT6 cable supports higher frequencies (up to 250 MHz) than CAT5e (up to 100 MHz), allowing for higher data transmission rates and less crosstalk, thereby supporting Gigabit Ethernet more effectively and with greater headroom.
Can I use this cable for Power over Ethernet (PoE)?
No, this cable uses CCA (Copper Clad Aluminum) and is not recommended for PoE. CCA cables can overheat when carrying both data and power, posing a safety risk and potentially damaging equipment. Always use pure copper cables for PoE applications.
Is this cable shielded?
No, this is an unshielded twisted pair (UTP) cable. While sufficient for most home and office environments, shielded cables offer better protection against electromagnetic interference (EMI) in highly noisy settings.
What does 'CCA' mean in cable construction?
CCA stands for Copper Clad Aluminum. It means the conductor is made of aluminum with a thin copper coating. While cheaper than pure copper, it offers less conductivity and durability, and is not suitable for PoE.
What is the maximum length for a CAT6 cable?
The standard maximum length for a reliable Ethernet connection using CAT6 cable is 100 meters (328 feet) for data transmission.
Will this cable work with my older router that only supports 10/100 Mbps?
Yes, this CAT6 cable is backward compatible and will work with older network devices. However, you will be limited to the speed supported by your older router (10/100 Mbps).
Troubleshooting
No network connection
Ensure both ends of the cable are securely plugged into the correct ports. Test the cable with a different device or port to rule out other equipment issues. Try a known working cable to verify if the cable itself is faulty.
Slow network speeds
Verify that both the connected devices and your network infrastructure support Gigabit speeds. Check for physical damage to the cable. Ensure the cable is not excessively long, as extreme lengths can degrade signal quality. Reduce the number of active devices on the network to isolate performance issues.
Intermittent connection drops
Inspect the cable for any visible damage, kinks, or sharp bends. Ensure the cable is not routed near sources of strong electromagnetic interference (e.g., power cables, microwaves). Try replacing the cable with a different one.
Pros and Cons
Pros
- Supports Gigabit Ethernet speeds (1000 Mbps).
- Meets CAT6 industry standards.
- Cost-effective solution for basic networking.
- Utilizes all four wire pairs for better performance than older standards.
Cons
- Uses Copper Clad Aluminum (CCA) construction.
- Not recommended for Power over Ethernet (PoE) applications.
- Unshielded construction may be more susceptible to interference in noisy environments compared to shielded cables.
Setup, Compatibility & Care
Setup:
Simply plug one end of the cable into your networking device (e.g., router, switch, computer) and the other end into its corresponding port. Ensure the connector clicks into place securely.
Compatibility:
This CAT6 cable is backward compatible with CAT5e, CAT5, and CAT3 standards, allowing it to function in older network infrastructure. It is compatible with all standard Ethernet ports.
Care:
- Avoid kinking or sharply bending the cable, as this can damage the internal wires.
- Keep the cable away from excessive heat sources.
- Periodically check connectors for dust or debris and clean gently with a dry cloth if necessary.
- Do not use this cable for Power over Ethernet (PoE) applications.