Frenchic Trim Paint - Wedgewood Green

No, Frenchic Trim Paint is self-priming, meaning you can apply it directly to most prepared surfaces without a separate primer.

No, this paint is also self-sealing, so no top coat is required. It dries to a durable, scuff-resistant finish on its own.

It's suitable for interior woodwork, trims, skirting, doors, radiators, metal, and furniture including kitchen cupboards and laminate surfaces.

A 500ml tin covers approximately 7m² with one coat. For a more durable finish, two coats are recommended, so you can expect to cover around 3.5m².

Yes, it is certified to EN71-3 standards, making it safe for use on children's toys and furniture.

Clean your brushes and tools immediately after use with warm, soapy water.

Allow at least 2 hours for drying between coats, but this can vary depending on temperature and humidity. Ensure the surface is touch-dry before applying the next coat.

Ensure the paint is stirred thoroughly. If still too thick, you may add a *very* small amount of water (less than 5%) to improve flow, but do so sparingly as it can affect the finish. Ensure you are using a quality brush or roller.

The surface may not have been adequately prepared. Ensure it was clean, dry, and free from oils or waxes. For very glossy surfaces, a light scuff sand is recommended before painting.

This can occur if coats are applied too thickly or if the paint is not stirred consistently. Ensure even application and stir the paint regularly during use. Allow adequate drying time between coats as per manufacturer recommendations.

Check ambient temperature and humidity; paint dries best in a well-ventilated area between 10-25°C. Avoid applying very thick coats, which can prolong drying times.