Best current price£7.99from Joybuy UK
Shopping.co.uk recommended and popular offers
Joybuy UK£7.99Visit shop Anycubic Joybuy X Pla Basic Printing Filament, 1Kg Spool, 1.75Mm Diameter, ±0.02Mm Tolerance - Green 6974662351722
Visit shop1 offer from £7.99
View price history by clicking the chart icon.
The ANYCUBIC PLA Basic Filament is an ideal choice for hobbyists and professionals who prioritize reliability and ease of use in their FDM 3D printing projects. This high-quality 1.75mm material offers excellent layer adhesion and minimal warping, making it perfect for both artistic models and functional prototyping. While its consistency is a major asset, users should ensure their storage environment remains dry to maintain the integrity of the material over time.
| Brand | ANYCUBIC |
|---|
While it varies by printer, most users find optimal results between 190°C and 220°C.
A heated bed is recommended to improve initial layer adhesion and reduce warping, though it is not strictly required for small prints.
This filament is 1.75mm in diameter with a tight tolerance of ±0.02mm.
It is compatible with any FDM 3D printer that supports 1.75mm PLA filament.
Store it in a cool, dry place, ideally inside a sealed container or bag with desiccant packets to prevent moisture absorption.
PLA is derived from renewable resources like corn starch, making it more environmentally friendly than petroleum-based plastics, though it requires specific industrial composting conditions to break down.
Adjust the retraction settings in your slicer software by increasing the retraction distance or speed slightly.
Ensure the print bed is level, clean, and calibrated. Consider using a glue stick or PEI sheet for added grip.
The filament has absorbed moisture. Dry the filament in a controlled dryer at approximately 45°C for 4-6 hours.
To ensure the best results, place your spool on a standard filament holder and feed it through your printer’s extruder assembly, ensuring there is no tension in the path. This filament is compatible with any FDM 3D printer that accepts 1.75mm PLA. For optimal care, keep the filament in a sealed bag with desiccant packets when not in use to avoid moisture absorption, which can cause popping sounds during extrusion and brittleness in the finished print. If the filament becomes brittle, dry it in a dedicated filament dryer to restore its printing properties.
