Best current price£92.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£92.00Visit shop B&Q - Powertronc Outdoor Pto100WEcg For Hid LampsFor Outdoor Lighting220-240V
Visit shop1 offer from £92.00
View price history by clicking the chart icon.
The OSRAM POWERTRONIC OUTDOOR PTo is an electronic ballast designed for professional outdoor lighting installations using high-intensity discharge lamps. It offers significant energy savings and enhanced protection features for reliable operation in demanding environments. A key benefit is its advanced 3DIM functionality for dimming control, however, it is not suitable for DC operation or instant hot restrike.
| Model Part Number | 4008321956361 |
|---|---|
| Brand | Osram |
The PTo offers high surge protection up to 3 kV between Line and Neutral (L-N) and up to 4 kV between Line/Neutral and Protective Earth (L/N-PE).
No, the POWERTRONIC OUTDOOR PTo is specifically designed for high-intensity discharge lamps, not LED lamps.
3DIM refers to the control options: StepDIM (manual or timed steps), AstroDIM (automatic dimming based on astronomical time), and DALI (Digital Addressable Lighting Interface), allowing for intelligent dimming and energy management.
No, this ballast is specifically designed for outdoor applications and must be installed in luminaires with IP54 protection or greater.
The supply voltage range is 220 to 240 V AC. The line voltage range is 198 to 264 V AC. The line frequency is 50 to 60 Hz.
The ballast monitors the lamp's operating status and will automatically shut down power to the lamp if a defect is detected, preventing potential hazards and protecting the system.
Please refer to the specific warranty documentation provided by OSRAM or the authorized distributor for the exact warranty period.
Verify power supply is on. Check all wiring connections for proper contact. Ensure the lamp is correctly seated and compatible with the ballast. Confirm the lamp is not defective.
Check for loose connections in the wiring. Ensure the supply voltage is within the specified range (198-264 V). Verify the lamp is not nearing the end of its life or is not the correct type for the ballast.
Ensure adequate ventilation around the ballast and within the luminaire. Check for obstructions in ventilation pathways. Confirm the ambient temperature is within the operational limits.
Check for short circuits in the wiring or lamp. Ensure the ballast is correctly grounded. Verify the circuit breaker rating is appropriate for the load.
Setup:
Compatibility:
Care:
