2PCS Gas Spring Lid Support Hinge 200N - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The LYTIVAGEN 2PCS Gas Spring Lid Support Hinge is designed for anyone looking to add a soft-closing, heavy-duty support to cabinet doors, toy boxes, or other lift-up lids. Its key benefit is providing a secure and gentle closure, protecting fingers and contents. A potential caveat is the required internal depth of at least 23 cm for installation. This hinge set features durable cold-rolled steel construction and a load capacity of up to 200N per piece, enabling it to support lids up to 20kg when used as a pair.
All features
| Colour | Silver |
|---|---|
| Brand | LYTIVAGEN |
Extended Product Information
FAQs
What is the weight capacity of these gas struts?
Each LYTIVAGEN gas spring lid support hinge has a capacity of 200N (approximately 10kg). When used as a pair, they can support a lid weighing up to 20kg.
What does 'soft close' mean for this product?
The soft-close feature means the lid will lower gently and slowly as it nears its closed position, preventing it from slamming shut and protecting fingers from injury.
What is the minimum depth required for installation?
You need an internal depth of at least 23 cm for the proper installation and functioning of these gas struts.
Can I use just one hinge?
While technically possible, it is highly recommended to use two hinges for proper support, balance, and even weight distribution, especially for lids weighing near the maximum capacity.
What materials are these hinges made from?
They are made from high-quality cold-rolled steel, which is known for its strength, durability, and resistance to deformation and air oxidation.
What are the maximum dimensions for a lid that these hinges can support?
These hinges are designed for lids with a maximum length of 130 cm / 50 inches and a maximum width of 65 cm / 25 inches.
Do I need to lubricate the hinges?
No, these gas struts are pneumatic and do not require periodic lubrication.
Troubleshooting
Hinge does not hold the lid open.
Ensure the lid's weight is within the supported range (up to 20kg for a pair). Check that both hinges are installed correctly and securely. Verify that the hinges are properly adjusted for the load.
Lid closes too quickly or slams shut.
This usually indicates the lid's weight is too low for the hinge's pressure or that the hinges require adjustment. Ensure the lid weight is sufficient for the 200N rating, or consider using a lower N-rated hinge if available and appropriate.
Hinge feels stiff or difficult to move.
Check for any obstructions or misalignments during installation. Ensure the lid and cabinet components are square. Do not force the hinge; if stiffness persists, contact the manufacturer.
Rust or corrosion appearing on the hinge.
While designed to resist oxidation, extreme environments can affect the finish. Clean the affected area gently with a soft cloth. Ensure the hinge is kept dry and clean. If significant rust develops, it may affect performance.
Pros and Cons
Pros
- Enhances safety with its soft-close feature, reducing the risk of pinched fingers.
- Provides robust support for heavy lids, preventing them from slamming shut.
- Constructed from durable materials for longevity and resistance to wear.
- Versatile use cases for various household storage solutions.
- Simple installation for a significant upgrade to existing furniture.
Cons
- Requires a minimum internal depth of 23 cm for proper installation.
- The 200N rating is per piece; two are needed for heavier applications up to 20kg.
- Lid length and width have maximum limitations (130cm x 65cm) for optimal performance.
- May require precise adjustment for the soft-close function to work effectively with lighter lids.
Setup, Compatibility & Care
Setup: To install, first determine the desired mounting points on your cabinet or lid, ensuring sufficient clearance for the hinge's range of motion. The hinge requires a minimum internal depth of 23 cm. Securely attach the hinge using appropriate screws (not included). It is recommended to use two hinges for optimal support and weight distribution, especially for lids weighing close to the 20kg maximum. Ensure the lid's weight is less than 400N (approximately 40kg) and that the hinges are properly adjusted for the soft-closing feature to engage effectively.
Compatibility: This gas strut set is compatible with a wide range of applications including toy boxes, pet roofs, cabinet doors, cupboard doors, and other heavy covers. It is suitable for lids with a maximum length of 130 cm / 50 inches and a maximum width of 65 cm / 25 inches. Ensure your application meets the minimum internal depth requirement of 23 cm.
Care: Clean the hinges periodically with a dry or slightly damp cloth to remove dust and debris. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal mechanisms. Regularly check that the screws remain tight and that the hinge operates smoothly. No lubrication is typically required for this type of pneumatic strut.