Best current price£105.86from B&Q
Shopping.co.uk recommended and popular offers
B&Q£105.86Visit shop - Fmt8102 Premium Twin Air And Fluid Hose Set. Rated At 30Bar. 1/4 Bsp Air Threads & 3/8 Bsp Fluid Threads. 2Mtr Length
Visit shop3 offers from £105.86 - £237.55
View price history by clicking the chart icon.
This Fast Mover Tools Twin Air And Fluid Hose Set is designed for professionals who require a reliable and durable hose for low-pressure air and fluid transport, particularly in environments involving paints, chemicals, and solvents. Its key benefit is exceptional flexibility and resistance to kinking and fatigue, ensuring longevity. A potential caveat is its suitability only for low-pressure applications. The set features a 10-meter length with 1/4" BSP air threads and 3/8" BSP fluid threads, boasting a 30 Bar fluid rating and 15 Bar air rating.
| Model Part Number | FMT8110 |
|---|---|
| Brand | Fast Mover Tools |
The hose is rated for a maximum air pressure of 15 Bar and a maximum fluid pressure of 30 Bar.
It features 1/4" BSP threads for the air connection and 3/8" BSP threads for the fluid connection.
Yes, its resistance to solvents and paints makes it suitable for use with paint sprayers, provided the pressure requirements are met.
No, this hose is designed for low-pressure air and fluid transport and is not suitable for high-pressure washing applications.
You can clean the hose with a damp cloth. It is resistant to many common workshop chemicals and paints, allowing for easy cleanup.
This particular model, the Fast Mover Tools Twin Air And Fluid Hose Set, is 10 meters in length.
The hose has good resistance to petroleum products, but always verify specific chemical compatibility charts for precise applications, especially with fuels.
Ensure the BSP threads are correctly aligned and tightened. Check if the fitting is damaged or if a seal (like PTFE tape or a rubber washer) is required and properly installed.
Verify that the hose is not kinked or twisted. Check both the air and fluid lines for internal blockages caused by debris. Ensure the pressure source is adequate for the intended application.
Check if the hose has been exposed to extreme temperatures or incompatible chemicals that could degrade the material. Store the hose properly coiled when not in use.
Inspect the hose for cuts or significant abrasion. If the damage compromises the hose's integrity or pressure rating, it should be replaced.
Setup: Connect your air source to the 1/4" BSP air coupling and your fluid reservoir or delivery system to the 3/8" BSP fluid coupling. Ensure connections are secure to prevent leaks and maintain optimal pressure. Always check that the pressure from your air compressor or fluid pump does not exceed the hose's maximum ratings (15 Bar for air, 30 Bar for fluid).
Compatibility: The hose is designed to work with standard air compressors and fluid pumps. Its specified thread sizes (1/4" BSP for air, 3/8" BSP for fluid) are common in many industrial and automotive applications. Ensure your existing fittings match these standards or use appropriate adapters.
Care: After use, wipe the hose clean with a damp cloth, especially if exposed to paints or chemicals. Store the hose loosely coiled to prevent unnecessary stress on the material and maintain its flexibility. Avoid dragging the hose over sharp objects or rough surfaces to preserve its abrasion resistance. Periodically inspect the hose for any signs of damage or wear.
