Best current price£59.87from B&Q
Shopping.co.uk recommended and popular offers
B&Q£59.87Visit shop B&Q - Air Window Windscreen Seal Cutter Fully Adjustable Speed Trim Rubber Remover
Visit shop2 offers from £59.87 - £60.70
View price history by clicking the chart icon.
The AB Tools AV557 Air Window Windscreen Seal Cutter is a professional-grade pneumatic tool designed for both automotive repair shops and DIY enthusiasts tasked with removing glued-in windscreens. By utilizing a high-speed cutting action to slice through tough adhesive and caulking compounds, this tool significantly simplifies the windscreen replacement process; however, users should note that it requires an air compressor capable of meeting the specific 30 CFM requirement for optimal operation.
| Model Part Number | AV557 |
|---|---|
| Brand | AB Tools |
This tool requires 30 CFM at 90 PSI to perform optimally.
It is designed for removing glued-in windscreens and works on most standard caulking and urethane adhesive systems.
The blades are held in place by a clamp mechanism. Ensure the air supply is disconnected before loosening the fasteners to swap blades.
Yes, regular lubrication via the air inlet is required to keep the internal pneumatic motor in good working condition.
Cranked blades provide offset clearance, which is essential for reaching adhesive beads tucked under trim or dashboard areas.
Because of the 30 CFM requirement, a standard small-tank household compressor may struggle to keep up; a professional-grade shop compressor is recommended.
Verify that your air compressor is delivering 90 PSI and check that your air hose is at least 3/8 inch in diameter to allow sufficient CFM airflow.
Ensure the blade is not dull and that you are not pushing the tool too fast; let the 5,000 OPM speed do the cutting.
Check the 1/4 inch BSP fitting for damaged threads or worn O-rings; apply thread sealant tape if necessary.
To set up the tool, ensure your air source is equipped with a 1/4 inch BSP fitting and that your supply hose meets the 3/8 inch (10mm) diameter requirement to support the 30 CFM draw.
