Wimberley RB-100 Riser Block - Wimberley

The RB-100 Riser Block is designed to add approximately 1 inch of height to your camera setup, which is particularly useful when using ground pods or when a small elevation adjustment is needed for your tripod head.

It features a 3/8"-16 male thread for mounting onto a tripod/monopod/ground pod and a 3/8"-16 female thread for attaching a tripod head.

Yes, as long as your tripod head has a standard 3/8"-16 mounting screw, it will be compatible with the RB-100.

While it adds a slight extension, if properly secured to both the tripod and the head, it should not introduce significant instability for typical photography use. Ensure all connections are tight.

No, the RB-100 provides a fixed 1-inch height increase and is not adjustable.

The product information does not specify the exact weight, but it is designed to be a lightweight accessory.

It is most beneficial for users of Wimberley's Ground Pod systems (like the Skimmer) who need extra clearance. It's not required for standard tripod setups unless a specific height adjustment is desired.

Ensure the 3/8"-16 stud on your tripod is clean and free of debris. Verify you are using the correct Riser Block for the stud size.

Ensure the riser block is tightened firmly onto the tripod stud and that the tripod head is securely tightened onto the riser block's mounting screw.

Check the 3/8"-16 threaded hole on the riser block for any obstructions. Gently realign the head's mounting screw before attempting to thread.