Genesis Ramp Transition Strip - Matt Brass - 0.9M

The primary benefit is its quick and effortless installation using a strong self-adhesive strip, eliminating the need for mechanical fixings and providing a professional finish between different floor levels.

This profile is designed for hard and smooth flooring types. While it can create a transition from carpet to hard flooring, the carpet edge must be securely finished, and the profile adheres best to the hard floor surface.

Measure the exact width of the gap or transition area you need to cover. It is advisable to slightly overestimate and cut to size if needed, keeping in mind the ±5mm manufacturing tolerance.

The transition strip is made from premium aluminium with a matt brass finish.

Clean with a damp cloth and mild soap if necessary. Avoid abrasive cleaners or harsh chemicals to preserve the matt brass finish.

'Retro-fit' means the profile is designed to be installed over existing flooring, making it ideal for renovations without needing to remove existing floor coverings.

Yes, the product is available in varying depth options to accommodate different floor height differences, ensuring a smooth transition.

Ensure the floor surface is thoroughly cleaned, dried, and completely free of dust, oil, or old adhesive. Reapply pressure along the entire length of the profile. For very uneven surfaces, consider using a compatible flooring adhesive in addition to the self-adhesive strip.

Verify measurements carefully. Remember that dimensions may vary by up to ±5mm due to manufacturing tolerances. If a precise fit is critical, purchase slightly longer and trim to size.

Clean the area gently with a soft, damp cloth. For minor scuffs, a non-abrasive metal polish designed for brass might be used cautiously, following product instructions. Avoid using harsh scrubbing pads.

Clean the affected area thoroughly and reapply firm pressure. If the issue persists, a small amount of strong, clear flooring adhesive or a suitable construction adhesive can be applied under the lifting edge. Ensure the adhesive is compatible with both the profile material and your flooring.