Stiga Brushcutter - 430mm

The Stiga BC 535 B uses a mixture of petrol and 2-stroke engine oil. The specific ratio is detailed in the user manual.

You can sharpen the metal blade with a file. Ensure the blade is securely held and wear appropriate safety gloves during sharpening.

The nylon line should be replaced when it becomes worn or breaks. The frequency depends on the usage and type of vegetation being cut.

Clean the brushcutter thoroughly, drain the fuel, and store it in a dry, well-ventilated area away from direct sunlight.

Always wear safety glasses or a face shield, gloves, sturdy footwear, and appropriate clothing. Ear protection is also recommended.

The Stiga BC 535 B is designed for cutting grass and undergrowth. It is not suitable for cutting trees.

Clean the air filter regularly by removing any dirt or debris. You may need to replace it periodically. Refer to the user manual for detailed instructions.

Check the fuel level, ensure the choke is correctly set, and inspect the spark plug. If the issue persists, consult the user manual for further troubleshooting.

Clean or replace the spark plug, check the air filter for blockages, and ensure the fuel mixture is correct.

Sharpen or replace the metal blade. Ensure the nylon head line is of the correct type and length.

Check that all bolts and screws are tightened. Inspect the shaft for any damage.

Ensure the fuel tank is filled with the correct fuel mixture and that the choke is correctly set. Check the spark plug and replace if necessary. Consult the user manual for additional starting instructions.