Shopping.co.uk

Tetrion Make Good Fix A Leak - 400ml - White

Tetrion Make Good Fix A Leak - 400ml - White

Tetrion Make Good Fix A Leak 400ml is a rubberised protective proofing formula designed to fill an...

Best current price£10.99from My Motor World

Best offers

Shopping.co.uk recommended and popular offers

All Offers

13 offers from £10.99 - £34.99

View price history by clicking the chart icon.

My Motor WorldTetrion Light/White Make Good Fix A Leak 400Ml
Free delivery in 1–3 days
£10.99
Visit shop
eBayTetrion Make Good Fix A Leak 400mL Spray Leaks & Cracks Sealant Filler
Free delivery in 1–3 days
£11.99
Visit shop
B&QB&Q - 4X Make Good Fix A Leak 400Ml Spray Leaks & Cracks Sealant Filler
Free delivery in 1–3 days
£22.99
Visit shop

Product Information

Full details

This guide is for anyone using Tetrion Make Good Fix A Leak (400ml, White) to seal leaks and cracks on various surfaces. The product offers a flexible, watertight seal that withstands environmental factors, providing a durable solution for both indoor and outdoor applications. Keep in mind that thorough surface preparation is essential for optimal adhesion and longevity.

All features

ColourWhite
Model Part NumberTFL400
BrandTetrion

Extended Product Information

FAQs

What surfaces can I use Tetrion Fix a Leak on?

It can be used on metal, wood, plastic, brick, concrete, and PVC.

Is the sealant waterproof?

Yes, it provides a watertight seal.

Can I paint over the sealant?

Yes, it can be overpainted once fully dry.

How long does it take for the sealant to dry?

Allow 15 minutes of drying time between coats.

How do I clean up overspray?

Use a white spirit-type solvent to clean up overspray before it dries.

Is the product UV resistant?

Yes, it is UV resistant.

What should I do before applying the sealant?

Clean the surface, making sure it is free from debris, rust, or old sealant. Lightly sand glossy surfaces.

How should I store the product?

Store in a cool, dry place, away from direct sunlight and heat sources.

Troubleshooting

Sealant is not adhering properly.

Ensure the surface is thoroughly cleaned and prepared before application. Lightly sand glossy surfaces.

Sealant is cracking after application.

Ensure the application is done in light, even coats. Avoid applying too thick of a coat at once. Allow for proper drying time between coats.

Overspray is causing unwanted marks.

Use a white spirit-type solvent to clean up overspray immediately. Protect surrounding areas with masking tape or sheets.

Pros and Cons

Pros

  • Effective sealing of leaks and cracks.
  • Suitable for a wide range of materials.
  • UV resistant and watertight properties.
  • Easy application with the aerosol format.
  • Can be overpainted for aesthetic purposes.
  • Helps prevent rust and corrosion.

Cons

  • Requires proper surface preparation for optimal results.
  • Overspray can occur during application.
  • White spirit-type solvent needed for cleaning before drying.
  • Limited to the 400ml size.
  • May not be suitable for all types of severe damage.
  • Drying time required between coats.

Setup, Compatibility & Care

  1. Surface Preparation: Ensure the surface is clean, dry, and free from loose debris, rust, or old sealant. Lightly sand glossy surfaces to improve adhesion.
  2. Application: Shake the can vigorously before use. Apply in short, even, light coats, maintaining a distance of about 20-30cm from the surface.
  3. Drying Time: Allow 15 minutes of drying time between coats. Apply additional coats as needed to build up a sufficient seal.
  4. Cleaning: Clean up any overspray or spillages immediately with a white spirit-type solvent before the product dries.
  5. Overpainting: Once the sealant is fully dry, it can be overpainted with a suitable paint for a discreet finish.

Price History

DatePrice
Visit shop