Lambskin Applicator - 10" - 3-Pack
Best current price£35.98from Amazon
Best offers
Shopping.co.uk recommended and popular offers
Amazon£35.98Visit shop Tru Lamb Black 10" Lambskin Applicator (3-Pack) (3)
Visit shopAmazon£35.98Visit shop One Offer
1 offer from £35.98
View price history by clicking the chart icon.
AmazonTru Lamb Black 10" Lambskin Applicator (3-Pack) (3)
Free delivery in 1–3 days
£35.98
Visit shop
Product Information
Full details
This 10" Lambskin Applicator 3-Pack by Tru Lamb is designed for DIYers and professionals seeking a smooth, even finish when applying polyurethane, stains, and waxes to hardwood floors and other flat surfaces. Its key benefit is achieving a professional look with minimal effort due to its absorbent and lint-free natural lambskin. A potential caveat is the need for proper cleaning to ensure reusability across multiple projects.
All features
| Model Part Number | B08ZNVLNRY |
|---|---|
| Brand | Tru Lamb |
Extended Product Information
FAQs
Can I use this applicator with paint?
This applicator is specifically designed for polyurethane, stains, and waxes. While it might apply paint, it's not optimized for it and may not provide the best results compared to tools designed for paint.
How many coats can one applicator handle?
With proper cleaning and care between coats, a single applicator can be used for multiple coats on a single project and also for subsequent projects.
What is the best way to clean the applicator after using oil-based polyurethane?
After use, immediately clean the applicator with mineral spirits or a suitable solvent to remove the oil-based polyurethane. Then, wash it thoroughly with soap and warm water. Rinse well and hang to dry.
Is this applicator suitable for small projects?
While it is 10" wide, it can be used for smaller projects, but you might find smaller applicators easier to manage for very detailed work. However, its smooth application is beneficial even on smaller, flat surfaces.
How long does it take for the applicator to dry after cleaning?
Drying time can vary based on humidity and temperature, but typically it takes several hours to a full day to dry completely when hung properly.
What should I do if I notice lap marks after applying a coat?
For minor lap marks, you can sometimes feather them out with the applicator while the finish is still wet. If the finish is already dry, you may need to lightly sand the area and reapply the finish, ensuring a wet edge this time.
Does the 3-pack mean I should use a new one for each coat?
Not necessarily. The 3-pack is convenient for large jobs or having spares. If cleaned properly, one applicator can be reused for subsequent coats of the same project. You might use one for coat 1, clean it, and use it again for coat 2.
Troubleshooting
Applicator leaves streaks or lap marks.
Ensure the applicator is fully saturated with finish and maintain a wet edge. Work in consistent, overlapping strokes. The surface may also need more prep if uneven.
Applicator is shedding fibers.
This indicates improper cleaning or excessive wear. Ensure the applicator is thoroughly cleaned after each use and dried properly. If shedding persists, it may be time to replace the applicator.
Finish is not applying evenly.
Check that the finish in your tray is not too thick or too thin. Ensure the applicator is consistently loaded with finish. Lightly spread the finish with the applicator and avoid pressing too hard.
Applicator becomes stiff after drying.
This can happen if not cleaned thoroughly. Ensure all finish residue is removed using the appropriate solvent or water. Re-soaking in the appropriate cleaner may help soften it.
Pros and Cons
Pros
- Achieves a smooth, even finish with minimal lap marks.
- Lint-free design prevents unwanted fibers in the finish.
- Absorbent material reduces the frequency of dipping.
- Suitable for both oil-based and water-based finishes.
- Reusable if cleaned properly, offering long-term value.
- Comes in a convenient 3-pack for larger projects.
Cons
- Requires careful cleaning to maintain reusability.
- May not be ideal for very small or intricate details.
- Natural material may have slight variations in density.
- Requires a finish tray for application, not self-contained.
Setup, Compatibility & Care
Setup: No assembly is required. Ensure the applicator is dry before use. Pour your chosen finish into a suitable applicator tray.
Compatibility: This applicator is compatible with oil-based and water-based polyurethane, stains, and waxes. It is best suited for flat surfaces like hardwood floors, decks, and tabletops.
Care: Immediately after use, clean the applicator thoroughly. For oil-based finishes, use mineral spirits or a suitable solvent, followed by soap and water. For water-based finishes, rinse with warm water and use mild soap if necessary. Squeeze out excess liquid and hang to dry completely. Do not machine wash or dry. Proper cleaning ensures the applicator remains lint-free and reusable for future projects.