Euroshowers Seal Tape - Grey

The tape measures 38mm wide and 3.2 meters long.

This product is designed for indoor wet areas like bathrooms and kitchens. Its long-term performance outdoors may vary.

It can be used on painted surfaces, but ensure the paint is well-adhered. Removing the tape later may potentially damage the paintwork.

To remove, gently heat the tape with a hairdryer on a low setting to soften the adhesive. Peel slowly and carefully. You may need to use a mild adhesive remover for any residue.

The PVC material and the nature of the seal it creates help to prevent moisture from getting trapped, which in turn inhibits the growth of mildew.

This tape is not designed to be painted over and may not adhere well to paint or withstand paint application.

Ensure the surface is thoroughly cleaned and completely dry before application. Remove any residual moisture, soap scum, or grease. Re-apply with firm pressure.

When applying, start from one end and press the tape down gradually, smoothing it with your finger or a flat tool (like a credit card) to push out air as you go. If bubbles appear after application, you may need to carefully lift and reapply that section.

Ensure the tape has been pressed down firmly along all edges. For very sharp corners or intricate areas, consider making small relief cuts in the tape before application to help it lie flat. Ensure no part of the tape is submerged in standing water immediately after application.