Axus Bubble Out Wallpaper Syringe - SY30

The Axus Bubble Out Wallpaper Syringe is designed for use with paste-the-wall and paste-the-paper wallpapers.

Always use the correct type of wallpaper paste recommended for your specific wallpaper. The syringe is compatible with most standard wallpaper pastes.

Rinse the syringe and needle thoroughly with water to remove all traces of wallpaper paste. Make sure the needle is clear and dry before storage.

The syringe is most effective for small to medium-sized air bubbles. If the bubbles are very large or the wall is significantly uneven, you may need to re-apply the wallpaper or consult a professional.

The needle is part of the syringe and is not designed to be replaced. Handle it with care to avoid bending or damage.

The syringe is manufactured by Axus Decor.

The model number of this syringe is SY30.

Ensure the wallpaper paste is the correct consistency and not too thick. Clean the syringe nozzle to remove any dried paste and try again.

The wallpaper might be severely damaged or the wall surface may be uneven. In such cases, the syringe may not be able to fix the issue. Consider removing and re-applying the section or consulting with a professional.

Insert the needle at a slight angle to minimize the hole size. Apply gentle pressure during injection to control paste flow.