Frenchic Wall Paint - Silent White

A 2.5l tin covers up to 35m² with a single coat. For best results and durability, two coats are recommended, providing coverage of approximately 17.5m².

No, Frenchic Wall Paint is self-priming and self-sealing, meaning no separate primer or top coat is required for most applications.

Once fully cured, the paint is completely scrubbable. Clean with a damp cloth or a soft sponge. For stubborn marks, use mild soap and water. Avoid abrasive cleaners.

It is suitable for interior walls and ceilings. However, it is not recommended for use in very wet areas such as shower enclosures or bath surrounds due to its water-based nature.

Yes, the paint is EN71-3 certified, making it safe for use on children's toys and surfaces in children's rooms.

Silent White has an ultra-matte finish, which is a sophisticated, non-reflective, and smooth appearance.

The paint is water-based and has virtually no odour, indicating very low VOC (Volatile Organic Compound) levels for a healthier indoor environment.

Stir the paint thoroughly. If still very thick, a *very* small amount of water (no more than 5%) can be added, but this may slightly affect coverage or finish. Ensure you are not painting in extreme temperatures.

Ensure paint is adequately stirred. Apply in thin, even coats using a good quality brush or roller. Avoid overworking the paint. Allow the first coat to dry completely before applying the second.

This can happen over dark colours or very porous surfaces. Ensure two coats are applied as recommended. Check that the surface was properly prepared and that you are applying a consistent layer.

The surface may not have been properly prepared (e.g., dusty, greasy, or glossy without sanding). Ensure the surface is clean, dry, and suitably prepared according to the instructions. Check for compatibility with previous coatings.