X-Sense Wi-Fi Smoke and Carbon Monoxide Alarm with Replaceable Battery, Smart Combination Detector - 1-Pack
2-in-1 Protection: Keep your home safe from both fires and carbon monoxide with a single alarm fea...2-in-1 Protection: Keep your home safe from both fires and carbon monoxide with a single alarm featuring both photoelectric and electrochemical CO sensors. These sensors operate independently to instantly alert you to hazardous smoke or CO levels, making it simple to protect your family from two deadly threats at once. Wi-Fi Connection: Manage this battery-operated smoke and CO alarm directly via the X-Sense Home Security app over 2.4 GHz Wi-Fi, with no base station needed. Tap in the App to Silence: Use the app to instantly silence the alarm without the hassle of trying to reach the test/silence button on the smart combination detector. Get Alerts Anywhere: Monitor your home remotely and receive immediate app notifications in the case of alarms, low battery, faults or more, giving you extra confidence when you leave the house. Device Sharing: Share your smoke and CO detector with up to 12 other users through the X-Sense Home Security app so family, friends and neighbors can get alerts too. Precautionary CO Alert: Get an early warning if CO levels exceed 100 ppm, allowing you to take action before a critical situation occurs.
This X-Sense Wi-Fi Smoke and Carbon Monoxide Alarm is designed for homeowners seeking dual-threat protection and smart home integration. Its key benefit is providing simultaneous alerts for smoke and CO, with remote monitoring and control via a smartphone app. A potential caveat is its reliance on a 2.4 GHz Wi-Fi network for smart features. This device combines photoelectric smoke detection and electrochemical CO sensing, offering a single-unit solution for household safety. Key features include app-based silencing, remote notifications, and device sharing capabilities.
All features
Model Part Number
SC06-WX
Brand
X-Sense
Extended Product Information
FAQs
How often should I test the alarm?
It is recommended to test the alarm monthly by pressing and holding the test button until the alarm sounds. You can also test its functionality through the X-Sense Home Security app.
What type of batteries does this alarm use?
This model uses replaceable batteries. Refer to the product manual for the specific battery type required.
Can I connect this alarm to a 5 GHz Wi-Fi network?
No, this alarm only supports 2.4 GHz Wi-Fi networks for its smart features.
What is the lifespan of this smoke and CO alarm?
The recommended lifespan for smoke and CO alarms is typically 7-10 years. Consult the product manual for the specific end-of-life indicator for this model.
How do I silence the alarm remotely?
You can silence the alarm remotely by opening the X-Sense Home Security app on your smartphone and tapping the silence button within the app interface.
What happens if the CO level is high but there's no smoke?
The alarm will sound a distinct pattern for carbon monoxide detection, separate from the smoke alarm pattern, and send a CO alert notification to your app.
Can I install multiple alarms in my home?
Yes, you can install multiple X-Sense alarms and manage them all through the X-Sense Home Security app, providing comprehensive coverage.
Troubleshooting
Alarm will not connect to Wi-Fi
Ensure you are using a 2.4 GHz Wi-Fi network. Check that your Wi-Fi password is entered correctly and that the alarm is within range of your router.
No notifications received on the app
Verify that push notifications are enabled for the X-Sense Home Security app in your phone's settings. Ensure the alarm is successfully connected to Wi-Fi and online in the app.
False alarms occur frequently
Check for environmental factors such as steam from showers, cooking fumes, or high humidity. Ensure the alarm is placed away from vents and cooking appliances. Clean the alarm vents gently.
Low battery warning persists after replacing batteries
Ensure the new batteries are correctly inserted according to polarity. Try using a different set of new batteries. If the issue persists, contact customer support.
Device is offline in the app
Check your home Wi-Fi connection. Restart your router and the X-Sense alarm. Re-attempt connection if necessary following the setup guide.
Pros and Cons
Pros
Combines smoke and CO detection in one device, saving space and simplifying installation.
Wi-Fi connectivity allows for remote monitoring and control via a smartphone app.
Offers remote silencing and alert sharing for added convenience and peace of mind.
Provides early warning for elevated CO levels before critical thresholds are reached.
No base station required, simplifying the setup process.
Cons
Requires a 2.4 GHz Wi-Fi network for smart features, not compatible with 5 GHz networks.
Relies on smartphone app for full functionality and remote alerts.
Battery-powered, requiring periodic battery replacement for continuous operation.
Limited to 12 shared users, which may be insufficient for larger households or communities.
Setup, Compatibility & Care
Setup:
Ensure you have a stable 2.4 GHz Wi-Fi network.
Download the X-Sense Home Security app from your device's app store.
Follow the in-app instructions to connect the alarm to your Wi-Fi network.
Install the alarm in a suitable location, typically on a ceiling or wall, following manufacturer guidelines for placement.
Compatibility:
Requires a 2.4 GHz Wi-Fi network.
Compatible with iOS and Android devices for app control.
Care:
Regularly test the alarm by pressing the test button.
Clean the exterior of the alarm with a dry or slightly damp soft cloth. Avoid using cleaning sprays or solvents directly on the device.
Replace batteries as indicated by the low battery warning or annually, whichever comes first.
Ensure smoke vents are kept free of dust and debris. A soft brush or vacuum cleaner attachment can be used gently.
OnBuy.com£58.02Visit shop 
Amazon£79.99Visit shop