Erismann Wallpaper - Grey

Use a high-quality adhesive specifically formulated for non-woven or vinyl wallpapers. Follow the paste manufacturer's instructions.

While durable, it's best suited for areas with moderate humidity. For bathrooms, ensure good ventilation and consider using a wallpaper sealant for added protection.

Due to its vinyl nature, it's often strippable when dry. Start at a seam and peel downwards. If it's difficult, dampen with water or a wallpaper remover and scrape gently.

Yes, it is phthalates-free and has low VOC emissions (Emissions A+), making it a healthier choice for indoor environments, including children's rooms.

Please refer to the product packaging or the manufacturer's specifications for the exact pattern repeat measurement to ensure proper design alignment.

Measure the width and height of your walls and calculate the total square meterage. Divide this by the square meterage covered by one roll (approximately 10 square meters, accounting for pattern repeat and waste).

Ensure wall surface is clean, dry, and properly primed. Use the correct type and amount of wallpaper paste. Reapply paste to the wall and reposition the strip.

Gently lift the edge of the wallpaper and re-smooth with a wallpaper brush or smoother, working from the center outwards. For stubborn bubbles, a pinprick may allow air to escape.

Check the pattern repeat guide. Ensure you are not stretching the wallpaper. Slightly reposition the second strip if needed, ensuring a snug fit without overlapping.

Handle the wallpaper gently during application. Avoid touching the metallic areas directly with wet hands. Clean smudges immediately with a slightly damp, soft cloth.