Dylon Hand Fabric Dye - Tulip Red

This dye is specifically formulated for natural fabrics such as cotton, linen, viscose, wool, and silk.

No, Dylon Hand Fabric Dye is not suitable for pure polyester, acrylic, nylon, or fabrics with special finishes.

One 50g pack can dye up to 250g of dry fabric to a full, rich shade. For larger items or lighter shades, you may need more dye or to adjust the fabric quantity.

Yes, Dylon Hand Fabric Dye provides strong, permanent color to natural fabrics. Proper setting and aftercare will help maintain vibrancy.

No, this product is specifically designed for hand dyeing. For machine dyeing, you would need a different Dylon product.

Often, salt is required as a fixative for hand dyes. Always refer to the specific instructions provided on the Dylon Hand Fabric Dye packaging for precise guidance on additives and quantities.

Immediately clean any spills with a suitable cleaner. Rinse dyeing containers thoroughly. Remember to wear gloves throughout the process to protect your hands from staining.

Ensure the fabric was clean and pre-wet before dyeing. Verify the fabric weight did not exceed 250g per 50g pack of dye. Check if the water temperature was appropriate and that the dye was fully dissolved. Increase dyeing time or agitation for deeper shades.

Ensure the fabric was fully saturated and pre-wet before adding to the dye bath. Stir the fabric continuously and thoroughly throughout the entire dyeing process to ensure even dye distribution. Avoid overcrowding the dye bath.

Confirm the fabric is a natural fiber (e.g., cotton, wool, silk) and not a synthetic like polyester or nylon. Check if the fabric has any special finishes or coatings (e.g., stain guard) that could repel the dye. Ensure all required additives (if any, as per packaging instructions) were used.

Always wear rubber gloves during the entire dyeing and rinsing process. Protect your workspace adequately with plastic sheeting or old newspaper. Clean up any spills immediately with an appropriate cleaner.