Ryobi Buffer - 18V ONE+™ - 150mm

The Ryobi 18V ONE+™ 150mm Buffer uses the Ryobi 18V ONE+™ battery system.

No, this is a bare tool. The battery and charger are sold separately.

The polishing bonnet is used for applying polish and wax, while the Terry Cloth bonnet is often used for removing wax or for final detailing.

Hand wash the bonnets with mild soap and water. Allow them to air dry completely before using them again.

It is primarily designed for automotive paint care. Always test in an inconspicuous area first.

Use a lower speed for wax application and a higher speed for polishing or removing swirls.

The product warranty information is not available in the provided text. Please refer to the manufacturer’s documentation for warranty details.

Check if the battery is properly inserted and charged. Ensure the power switch is in the on position. If the battery is depleted, recharge it.

Ensure you are using the correct polishing compound and pad combination. Check the pad for debris. If using wax, ensure the wax is applied evenly and not too thick. Also check the speed is appropriate for the task.

Check the bonnet and pad for any damage or uneven wear. Make sure the bonnet is correctly attached and centered on the pad.

Reduce the speed setting or use a higher capacity battery for extended use. Ensure the battery is fully charged before use.