HOMCOM Ceramic Tower Heater - White

Press the oscillation button on the control panel or the remote to activate. The heater will rotate from side to side to distribute heat.

The remote control requires batteries; the specific type is not mentioned in the product information.

Use the timer button on the control panel or the remote. You can set the timer for a duration between 1 to 8 hours.

The heater includes safety features such as tip-over protection, but it's always recommended to supervise electrical appliances when in use and never leave it unattended for extended periods.

Use the temperature control buttons on the control panel or the remote to adjust the temperature between 10-49°C.

No, this heater is designed for indoor use only and should not be used in bathrooms or other wet environments.

The heater is equipped with tip-over protection and will automatically shut off if it tips over. Ensure the heater is placed on a stable surface before restarting.

The product information does not specify an air filter, only that the air intake and outlet should be cleaned regularly.

Check if the unit is plugged into a working outlet. Ensure the power switch is in the 'on' position. Check if the tip-over protection has been activated and reset if necessary.

Make sure the heating mode is selected (Low or High). Check the temperature setting; it might be set too low. Ensure the room temperature is below the set temperature.

Check the batteries in the remote control and replace them if needed. Ensure there are no obstructions between the remote and the heater.

The overheating protection may have been activated. Unplug the heater and allow it to cool down. Check for any obstructions blocking the air intake or outlet.

If the heater is new, the smell might be from the heating elements. This should dissipate after a few uses. Ensure there is no dust or debris on the heating elements.