Beta Roller Stud Extractors - 9mm - 1/2'' Square Drives

The Beta 1433 series is available in multiple sizes to accommodate different stud diameters. The specific model 014330009 is designed for 9mm studs.

Yes, it is designed with a standard 1/2 inch square drive, making it compatible with most 1/2 inch drive ratchets, breaker bars, and torque wrenches.

The internal roller mechanism tightens onto the stud as torque is applied, providing a secure, controlled grip that minimizes the risk of damaging the stud compared to methods like locking pliers.

Yes, the tool also features an external hex head, allowing you to use a standard spanner or wrench, which is particularly useful in confined spaces where a ratchet might not fit.

It is effective for removing studs that protrude sufficiently for the tool to grip. For studs broken flush or below the surface, additional methods may be needed.

Keep the tool clean and dry. After use, wipe away debris from the rollers and drive socket. Store it in a dry place to prevent corrosion.

The tool grips the stud mechanically and its function is independent of the thread direction. It can be used for both clockwise (installation) and counter-clockwise (extraction) rotation, provided the stud is appropriate for the tool's size.

Ensure you are using the correct size tool for the stud diameter. Apply consistent, steady torque. Clean any debris from the stud and the tool's rollers.

Verify that the stud diameter matches the specified size range of the tool. The 014330009 model is designed for 9mm studs.

Check for obstructions in the 1/2 inch square drive socket. Ensure the ratchet is fully engaged with the tool. If access is limited, try using the external hex head with a spanner.

The tool provides a controlled grip, but severely seized or damaged studs may still break. If this occurs, further specialized extraction methods may be required.