ViperClip Fire Cable Clips - 1.0-1.5mm² - 1000 Pack

These clips are specifically designed for flat twin and earth cables with conductor sizes of 1.0mm² and 1.5mm².

No, these ViperClip fire clips are designed for exclusive use with the ViperClip Cable Clip Gun only. Using them with other tools may result in improper installation or damage.

They are suitable for installation into both natural and engineered timber, including LVL, CLT, and OSB.

Yes, they are fire-rated and designed to maintain secure cable holding during a fire event, preventing premature cable collapse and aiding evacuation safety.

Each pack contains 1000 ViperClip fire cable clips.

These clips aid in 18th Edition Compliance by maintaining cable support in the event of a fire, which is a key consideration for modern electrical installations.

Ensure the ViperClip Cable Clip Gun is correctly loaded and functioning. Check that the clip is seated properly in the gun's mechanism. Verify you are using the correct type and size of clip for the gun.

Confirm the cable is the correct size (1.0mm² or 1.5mm² flat twin and earth). Ensure the clip is fired into a solid timber substrate and not a void or excessively soft wood. Check for any obstructions around the cable that might prevent a snug fit.

Verify that the timber substrate is within the recommended hardness range (avoiding extremely dense hardwoods or very soft, crumbly wood). Ensure the ViperClip Cable Clip Gun is set to the appropriate power level if adjustable, or check if the gun requires maintenance.