Marmox MSP360 Adhesive and Sealant - BIOGMBF12

This product is designed for construction and structural sealing; it is not recommended for contact with food or use in food preparation areas.

Yes, it is highly compatible with the entire Marmox product range, including their insulation boards.

While it has a 10-minute working time for positioning, it achieves a full cure strength relative to the thickness of the application within 24-48 hours.

The modified silane-polymer technology is solvent-free, making it safer to use in confined or poorly ventilated areas compared to traditional solvent-based glues.

Yes, once fully cured, the sealant can be painted over with most common decorative paints.

Uncured adhesive can be removed with a suitable solvent or white spirit. Once cured, it must be removed mechanically by scraping or cutting.

Ensure the product is at room temperature. If it has been stored in a cold environment, the viscosity will increase, making it harder to dispense.

Verify that the contact surfaces are free of contaminants like oil, grease, or peeling paint, which can prevent proper adhesion.

Apply painter's tape along the edges of the joint before application and smooth the bead with a specialized tool or a gloved finger before the 10-minute cure starts.