Pipe Flexi Connector - 1/2 Inch x 1/2 Inch - 30cm

These durable flexible tap connectors feature braided steel hoses, making them ideal for installat...

Best current price£3.13from Debenhams

All Offers

2 offers from £3.13 - £3.99

View price history by clicking the chart icon.

DebenhamsThe Bath Plus Unisex Silver Pipe Flexi Connector 1/2" X 1/2" Flexible Water Hose Plumbing 30Cm In
Free delivery in 1–3 days
£3.13
Visit shop
B&Q - Pipe Flexi Connector 1/2" X 1/2" Flexible Water Hose Plumbing 30Cm
Free delivery in 1–3 days
£3.99
Visit shop

Product Information

Full details

The Pipe Flexi Connector is an essential plumbing component designed for DIY enthusiasts and professionals alike who need to connect faucets or toilets in restricted spaces. Its primary benefit is the flexible braided steel design, which allows for effortless navigation around corners and tight under-sink areas where rigid pipes cannot reach; however, users should note that the 30cm length is fixed, so careful measurement of the required distance is necessary before installation to avoid tension on the connections.

All features

Model Part Number5060901371055
BrandThe Bath Plus

Extended Product Information

FAQs

Can I use this for hot water?

Yes, it is designed to withstand temperatures up to 70°C.

Is this safe for drinking water?

Yes, the materials used are safe for use with potable water systems.

Do I need plumber's tape on the threads?

These connectors typically use compression or flat-face fittings with a rubber washer, meaning plumber's tape is usually not required and may even interfere with the seal.

What is the maximum pressure this can handle?

The connector is rated for operation up to 15 bar.

Can I connect two of these together to make a longer hose?

It is not recommended to chain flexible connectors together, as this increases the number of potential leak points and restricts water flow.

Troubleshooting

Water leaking at the connection point

Ensure the washer is seated correctly and tighten the nut slightly more; if it continues to leak, inspect the washer for damage or ensure the pipe end is not bent.

Difficulty threading the nut onto the pipe

Check that the threads are aligned perfectly straight before rotating; forcing the nut can cause cross-threading and ruin the fitting.

Pros and Cons

Pros

  • Highly flexible for tight installations
  • Durable stainless steel outer braiding
  • Corrosion-resistant nickel-plated brass fittings
  • Safe for use with potable water systems

Cons

  • Fixed 30cm length limits range
  • Not suitable for high-heat industrial applications above 70°C
  • Requires proper wrench tightening to avoid over-compression

Setup, Compatibility & Care

To install, ensure the connection points are clean and free of debris. Always use appropriate rubber washers (typically included) to ensure a watertight seal before tightening the 1/2 inch nuts with an adjustable spanner. Do not overtighten, as this can damage the rubber washers and cause leaks; a firm turn past hand-tight is usually sufficient. Regularly inspect the braiding for signs of fraying or rust, especially if located in a humid area like a vanity cabinet. If you notice any bulging or small water beads on the surface of the braid, replace the connector immediately to prevent a burst.

Price History

DatePrice
Visit shop