Toupret Joint, Skim and Fill Quick Dry 10kg - White
Toupret Joint, Skim & Fill Quick Dry is a versatile filler ideal for surface finishing, filling, a...Toupret Joint, Skim & Fill Quick Dry is a versatile filler ideal for surface finishing, filling, and plasterboard jointing. This fast-drying filler is ready to be painted over in just 3 hours, allowing for same-day completion of jobs. It can be applied in a single coat with no shrinkage and no depth limit, and it is easy to sand for a professional finish. It adheres to BS EN 13963 standards for jointing applications and can be used on a variety of substrates including gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks, and stone. It is suitable for interior use and manual applications. Mixing rates vary for filling (38% water) and adhesive/levelling (42% water). Application thickness for filling has no limit, and up to 5mm for levelling. Consumption is 1.1kg/m/mm. The second coat can be applied after 45 minutes, and it is overcoatable after an average of 3 hours.
Toupret White Joint, Skim & Fill Quick Dry - Fast Drying Plasterboard Joint & Skim Filler - Crack Resistant, Easy Sand, Paintable Interior Wall & Ceiling Filler - 10KgFree delivery in 1–3 days£26.86Visit shop →
Product Information
Full details
This guide is for anyone looking to use Toupret Joint, Skim & Fill Quick Dry for surface finishing, filling, and plasterboard jointing. The product's key benefit is its fast-drying time, allowing for same-day project completion. However, keep in mind that mixing ratios vary depending on the application. This guide will walk you through the product's features, uses, and best practices to ensure a professional finish.
All features
Colour
White
Model Part Number
FGBJSR10GB
Brand
Toupret
Extended Product Information
FAQs
What is the drying time?
It is ready to be painted over in approximately 3 hours.
What is the mixing ratio for filling?
38% water.
What surfaces can I use this on?
Gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks, and stone.
Can I apply multiple coats?
Yes, you can apply a second coat after 45 minutes.
What is the application thickness limit for levelling?
Up to 5mm.
Is this product suitable for exterior use?
No, it is for interior use only.
What is the coverage rate?
Approximately 1.1kg/m²/mm.
How should I store the product?
Store in a dry place, away from extreme temperatures.
Troubleshooting
Filler is not drying quickly.
Ensure the application thickness is within the recommended limits and that the room is well-ventilated.
Filler is shrinking after drying.
Ensure the correct mixing ratio is used and that the product is applied in a single coat.
Difficulty in sanding.
Allow sufficient drying time and use appropriate sanding equipment and grit.
Filler not adhering to the substrate.
Ensure the surface is clean, dry, and free from any loose particles or previous coatings that may affect adhesion.
Pros and Cons
Pros
Fast drying time allows for same-day project completion.
Versatile use for filling, skimming, and jointing.
Easy to sand for a professional finish.
Suitable for various substrates, increasing its usability.
Can be applied in a single coat.
No depth limit during application for filling.
Cons
Mixing ratios vary depending on the application type (filling vs. adhesive/levelling).
Requires proper mixing to achieve desired consistency.
Suitable for interior use only.
Setup, Compatibility & Care
Preparation: Ensure the surface is clean, dry, and free from loose particles.
Mixing: Mix with water, following the correct ratio: 38% water for filling and 42% for adhesive/levelling.
Application: Apply with a filling knife or trowel. For filling, there's no depth limit, while for levelling, apply up to 5mm thickness.
Drying: Allow to dry for approximately 3 hours before painting. Apply a second coat after 45 minutes.
Substrate Compatibility: Compatible with gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks, and stone.
Coverage: Approximately 1.1kg per square meter per millimeter of thickness.
Storage: Store in a dry place, away from extreme temperatures.
Power Tools Direct£14.35Visit shop 
B&Q£20.90Visit shop 
Amazon£25.22Visit shop 
