DMC Myrtle Kit - William Morris

14-count Aida fabric means there are 14 stitches per inch. This is a common and versatile fabric count suitable for many designs, offering a good level of detail without being overly small.

This kit is rated as 'Intermediate'. It requires knowledge of basic cross-stitch and backstitch techniques and the ability to follow a chart.

While you can adapt the design with your own threads, the kit is designed to work with the specific DMC thread colors provided for an authentic representation of the 'Myrtle' pattern.

Completion time varies greatly depending on individual stitching speed and the time dedicated. An intermediate stitcher might take anywhere from 15-30 hours to finish this 18cm diameter piece.

The primary stitches used are the full cross-stitch and the backstitch. Instructions for these stitches are typically included in the kit.

The finished embroidery will be approximately 18cm in diameter, as dictated by the size of the included wooden hoop.

No, this is a counted cross-stitch kit. The design is not printed on the fabric; you will count the squares on the Aida fabric to create the pattern according to the chart.

Ensure you are using the recommended number of strands (usually 2-3). Do not pull the thread too tight when stitching. Cut shorter lengths of thread to minimize tangling.

Ensure good lighting. Some users find it helpful to lightly shade the completed stitches on the chart with a pencil to keep track of progress.

Loosen the screw on the hoop, stretch the fabric evenly around the inner and outer rings, and then tighten the screw firmly. You can also wrap the inner hoop with a strip of fabric or bias tape for extra grip.

Ensure consistent tension when making each stitch. Try to make your cross stitches form a uniform shape, with all stitches going in the same direction for the top leg of the cross.