Kenable Cat5E Ethernet Cable - FTP - CCA - 15m

The Foil Twisted Pairs (FTP) feature provides shielding against electromagnetic interference, which helps to ensure a more stable and reliable data connection, especially in environments with other electronic devices.

No, this cable is explicitly stated as not suitable for PoE devices. It is designed for data transfer only and cannot transmit electrical power.

CCA stands for Copper Clad Aluminium. It uses a core of aluminium coated with a thin layer of copper. This construction makes the cable lighter, more flexible, and less expensive than pure copper cables, while still providing adequate performance for data transmission.

Yes, Cat5e cables, including this FTP CCA version, are generally rated to support Gigabit Ethernet (1000 Mbps) speeds for data transmission, provided the rest of your network infrastructure also supports these speeds.

For standard data networking, a 15m Cat5e cable is well within the recommended maximum length limits (typically 100 meters for Cat5e). Performance degradation over this length should be minimal if the cable is undamaged and free from excessive interference.

While technically possible, CCA cables can be more challenging to terminate correctly than pure copper cables due to the different material properties. It is recommended to use the pre-moulded connectors provided or seek professional assistance if re-termination is necessary.

Cat6 cables generally offer higher bandwidth and support faster data transfer speeds (up to 10 Gbps over shorter distances) and are typically built with thicker, pure copper conductors and tighter twists for better performance, especially in demanding network environments. Cat5e is sufficient for most standard home and office networking needs.

Ensure both ends of the cable are securely connected. Try a different Ethernet port on your router/switch and device. Verify the cable is not damaged and test with another known working cable if possible. Confirm the device's network adapter is enabled.

Check for physical damage to the cable, including kinks or frayed sections. Ensure the cable is not routed too close to strong sources of electromagnetic interference. Clean the RJ45 connectors. If using CCA, consider a pure copper cable if performance is critical and interference is suspected.

This cable is not designed for PoE. You must use a specific PoE-compatible cable (typically Cat5e or higher rated with pure copper conductors) for devices requiring power over Ethernet.

Gently check the retaining clip on the RJ45 connector for damage. Ensure the port on the device is clean and free of obstruction. If the clip is broken, the connector may not stay securely in place, and the cable may need replacement.