Best current price£12.99from Joybuy
Shopping.co.uk recommended and popular offers
Joybuy£12.99Visit shop Creality Blue Hyper Pla 1Kg High-Speed 30-600Mm/S, Dimensional Accuracy +/-0.02Mm, Compatible With Most Fdm 3D Printers, 1Kg (2.2Lbs) Spool
Visit shop4 offers from £12.99 - £18.98
View price history by clicking the chart icon.
The Creality Hyper PLA Blue 1KG spool is designed for hobbyists and professionals who prioritize speed without sacrificing model quality. It is optimized for FDM printers and offers high dimensional accuracy, making it ideal for rapid prototyping and detailed decorative prints. Users should note that while it supports extreme speeds up to 600mm/s, achieving the best results requires a well-calibrated printer and adherence to the recommended temperature range of 190°C to 230°C.
| Model Part Number | 3301010341 |
|---|---|
| Brand | Creality |
Yes, as long as your printer accepts 1.75mm diameter PLA filament, this material is compatible.
The recommended nozzle temperature is between 190°C and 230°C.
PLA is biodegradable and may warp under prolonged direct sunlight or high-heat conditions; it is best suited for indoor use.
A heated bed is recommended to ensure strong first-layer adhesion, typically set between 45°C and 60°C.
Store it in a dry environment, preferably in a vacuum-sealed bag with desiccant packets to prevent moisture absorption.
Increase your hotend temperature by 5-10°C to improve flow or check for resistance in your extruder.
Clean your build plate with isopropyl alcohol and ensure your Z-offset is correctly calibrated for a first-layer 'squish'.
Fine-tune your retraction settings in your slicer, specifically testing shorter distances for direct-drive setups.
To ensure the best performance, set your extruder temperature between 190°C and 230°C. For the initial layer, a slightly higher temperature can improve adhesion to the build plate. Since PLA is hygroscopic, store your filament in a dry, cool place inside a sealed bag with desiccant when not in use. To prevent tangles during long prints, ensure the spool is placed on a smooth-rotating holder, and monitor the filament path to avoid sharp bends that could cause resistance in the Bowden tube or direct-drive extruder.
