Best current price£12.98from Amazon
Shopping.co.uk recommended and popular offers
Amazon£12.98Visit shop Yonico 13139 1-3/8-Inch Diameter Thumbnail Table Edge Thumbnail Router Bit 1/2-Inch Shank
Visit shop3 offers from £12.98 - £52.68
View price history by clicking the chart icon.
This YONICO Table Edge Router Bit is designed for woodworkers seeking precise and clean edge profiles on their projects. Its industrial-quality construction ensures durability and consistent results, though its specialized nature means it's best suited for specific edge-shaping tasks rather than general routing. Key features include C3 micro-grain carbide cutters, solid hardened steel bodies, an anti-kickback design, and a heat-resistant Teflon coating for enhanced performance and safety.
| Model Part Number | 13140 |
|---|---|
| Brand | YONICO |
This router bit is specifically designed for creating decorative and functional table edge profiles on wood projects.
The bit has a 1/2" shank, which is a standard size for many routers and router tables.
After use, clean the bit with a soft brush or a cloth lightly dampened with a mild solvent to remove wood dust and resin. Avoid harsh abrasives.
The anti-kickback design helps to reduce the risk of the router bit suddenly grabbing and being thrown back towards the user, enhancing safety during operation.
While technically possible, this bit is optimized for edge profiling. For general grooving or dado cuts, specialized bits designed for those tasks would provide better results and efficiency.
The Teflon coating is build-up and heat resistant, which helps to reduce friction during cuts, prevent resinous materials from sticking to the bit, and extend the tool's operational life.
Yes, YONICO offers a satisfaction guarantee and a lifetime warranty on their router bits.
Ensure the bit is sharp and free of debris. Check that the router speed and feed rate are appropriate for the type of wood being cut. Verify the cutting depth is not too aggressive; try taking shallower passes.
Reduce the feed rate or router speed. Ensure the Teflon coating is intact and clean. Take shallower cuts to reduce friction.
Confirm the wood is securely held. Ensure the feed direction is correct against the rotation of the bit. Make sure the bit is seated properly in the router's collet.
Check for resin buildup on the cutting edges; clean thoroughly. If buildup persists or edges are damaged, professional sharpening or replacement may be necessary. The Teflon coating can sometimes mask dullness, so always clean first.
Setup: Ensure your router or router table chuck is clean and free of debris. Insert the 1/2" shank of the YONICO router bit securely into the chuck, tightening it firmly according to your router's manual. Set the appropriate cutting depth. For best results, it is recommended to take multiple shallow passes rather than one deep pass, especially in hardwoods.
Compatibility: This bit features a 1/2" shank and is compatible with any router or router table that accepts this size shank. Please verify your router's specifications before purchase.
Care: After each use, clean the bit to remove wood dust and resin. A soft brush or a cloth with a mild solvent can be used. Avoid abrasive cleaners. Store the bit in its original packaging or a protective case to prevent damage to the cutting edges and coating. Regular cleaning will help maintain the Teflon coating and ensure optimal performance.
