Best current price£74.99from eBay
Shopping.co.uk recommended and popular offers
eBay£74.99Visit shop Sealey Stud Extractor Set 25 Piece Stud Extractors Quality Work Tools VS7233
Visit shop
B&Q£77.18Visit shop B&Q - Vs7233 Stud Extractor Set 25Pc
Visit shop11 offers from £74.99 - £130.37
View price history by clicking the chart icon.
The Sealey VS7233 is a 25-piece professional-grade stud extractor set tailored for automotive technicians and mechanics who need a reliable method for removing stubborn, broken studs and bolts. Its primary benefit is the inclusion of precision-engineered centring pilots and a comprehensive range of drill bits that ensure accurate extraction without damaging the surrounding threaded housing. While this set offers exceptional versatility for engine manifold work, it requires a steady hand and a degree of mechanical proficiency to avoid snapping the drill bits or damaging the workpiece material.
| Model Part Number | VS7233 |
|---|---|
| Brand | Sealey |
Yes, it can remove stainless steel, but you must use high-quality cutting oil and very low RPM to avoid work-hardening the metal.
No, using an impact driver will likely snap the drill bits or the extractor shafts. Use a standard drill in a non-impact mode.
The set is designed for studs starting at 4.75mm.
Yes, the drill bits are standard sizes, allowing for easy replacements if one becomes dull or breaks.
This kit is designed to remove the broken stud shaft, not to repair the existing internal threads in the housing.
Verify if the stud is hardened steel; if so, ensure you are using a sharp bit and appropriate cutting lubricant, then apply steady pressure at a low RPM.
Ensure the hole drilled is not too wide for the chosen extractor; try the next size up if available or re-drill deeper to provide better grip.
Always use the included centring pilots; if the surface is too uneven, use a center punch to create a small dimple before starting the drilling process.
Setup requires a manual or variable-speed drill (do not use high-impact settings). Ensure the broken stud surface is as flat as possible before initiating the center-punching process. Compatibility is broad, covering most metric stud sizes within the 4.75mm–15mm range. For care, always wipe the drill bits and extractor shafts with a light machine oil after use to prevent corrosion. Store the components in their designated slots in the case to ensure you do not lose the small centring pilots, as the kit relies on these for successful alignment.
