Weatherboard Cladding Two Part Edge Trim - 3mtr - Misty Grey

Two Part Edge Trim saves the hassle of trying to wrestle boards into fixed channel trims when spac...

Best current price£16.81from Professional Building Supplies

All Offers

3 offers from £16.81 - £42.85

View price history by clicking the chart icon.

Professional Building SuppliesFreefoam Grey Weatherboard Cladding Two Part Edge Trim - 3Mtr Misty
Free delivery in 1–3 days
£16.81
Visit shop
PVC Cladding UKFreefoam Grey Weatherboard Cladding Two Part Edge Trim - 3Mtr Misty
Free delivery in 1–3 days
£16.81
Visit shop
B&QB&Q - Freefoam Fortex Two Part Edge Trim 3M Misty GreyUpvc Weatherboard Cladding
Free delivery in 1–3 days
£42.85
Visit shop

Product Information

Full details

The Freefoam Weatherboard Cladding Two Part Edge Trim (FC301E3MG) is designed for contractors and DIY enthusiasts who need a reliable, clean finish for exterior cladding projects, particularly in constrained spaces. Its primary benefit is the two-part design, which removes the need to slide cladding boards into a fixed channel, significantly reducing installation time and frustration. However, users should note that the snap-fit mechanism requires precise initial alignment of the rear section to ensure a secure, weatherproof connection.

All features

Model Part NumberFC301E3MG
BrandFreefoam

Extended Product Information

FAQs

Can this trim be used with any cladding thickness?

It is designed for standard weatherboard cladding; please check your board thickness against the trim’s internal groove dimensions.

Is the material UV stable?

Yes, it is designed for exterior use and to resist fading under normal sunlight exposure.

Can I paint the trim to match a different color?

The product comes in a pre-finished Misty Grey; painting is generally not recommended as it may affect the snap-fit tolerances and warranty.

How do I cut the 3-meter lengths?

It can be cut easily using a fine-toothed hand saw or a power miter saw with a blade suitable for PVC.

Does it come with fixing screws?

No, fixings should be selected based on the specific material of the substrate you are attaching the trim to.

Troubleshooting

Snap-fit cover is not clicking into place

Check that the rear channel is free of debris or excess adhesive and ensure the cladding boards are not protruding too far into the channel.

Cover feels loose after installation

Verify that the rear section was mounted at the correct depth relative to the cladding board thickness.

Pros and Cons

Pros

  • Significantly faster installation compared to fixed channel trims
  • Ideal for tight spaces where board sliding is not possible
  • Professional, clean finish with hidden fixings
  • High-quality material suitable for exterior longevity

Cons

  • Requires precise measurement of the rear section before fixing
  • The snap-fit mechanism requires extra care to avoid damage during installation
  • Limited to specific board thicknesses designed for this channel

Setup, Compatibility & Care

To install, ensure the rear section is mounted plumb and level, as this determines the alignment of the final finish. Use appropriate fixings suited to your building substrate. Once the cladding boards are cut to size and secured, align the snap-fit cover with the rear channel and apply firm, even pressure along the length until it clicks into place. For maintenance, clean the trim periodically using a soft cloth and mild soapy water to remove dirt and debris. Avoid using abrasive sponges or harsh chemicals that could strip the finish.

Similar items

Price History

DatePrice
Visit shop