BH Dinger - Large 19mm Bucket Handle

The Large 19mm Ding'er is constructed from durable, high-quality materials suitable for high-temperature applications.

No, this model specifically features a 19mm joint and is only compatible with 19mm joints.

Heat the bucket area evenly with your preferred heating device (e.g., torch) until the desired temperature is reached. Avoid heating the joint itself.

This Ding'er is designed for vaporization. Specific material compatibility may vary; always ensure your material is suitable for vaporization at the temperatures achieved.

Store in a cool, dry place. Ensure it is clean and completely dry before storage to prevent any buildup or damage.

Yes, the larger 19mm size generally allows for increased airflow, resulting in a smoother and potentially cooler draw compared to smaller joints.

Ensure the joint is clean on both the Ding'er and the equipment. If a loose fit persists, consider using a joint grease or a very thin strip of PTFE tape (use sparingly) on the male joint of the accessory, not the Ding'er itself, if applicable.

Check that the Ding'er is heated uniformly. Ensure material is spread evenly within the bucket. Confirm airflow is not obstructed.

Soak the cooled Ding'er in isopropyl alcohol (90%+) for 15-30 minutes. Use a cotton swab or soft brush to remove loosened residue. Rinse thoroughly with hot water and allow to dry completely before next use.