Air Mass Sensor - Denso - DMA-0200
Best current price£94.67from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£94.67Visit shop Air flow meter DMA-0200 DENSO for AUDI VW SKODA SEAT
Visit shopeBay£94.67Visit shop All Offers
11 offers from £94.67 - £245.89
View price history by clicking the chart icon.
eBayAir flow meter DMA-0200 DENSO for AUDI VW SKODA SEAT
Free delivery in 1–3 days
£94.67
Visit shop
Air flow meter DMA-0200 DENSO for AUDI VW SKODA SEATFree delivery in 1–3 days£97.82Visit shop →
DENSO DMA-0200 Air Mass Sensor for AUDI,SEAT,SKODA,VWFree delivery in 1–3 days£117.02Visit shop →
Fits DENSO DMA-0200 MASS AIR FLOW SENSORFree delivery in 1–3 days£118.07Visit shop →
MASS AIR FLOW SENSOR DMA-0200 FOR SKODA VW TRANSPORTER/IV/Van/Mk/T4 GOLF POLOFree delivery in 1–3 days£122.53Visit shop →
Air Mass Sensor DMA-0200 Denso Flow Meter 06A906461B 06A906461BX AFH6010C NewFree delivery in 1–3 days£125.00Visit shop →
✅Fits DENSO DMA-0200 MASS AIR FLOW SENSOR ⭐UK Seller⭐Free delivery in 1–3 days£127.45Visit shop →
DENSO MASS AIRFLOW SENSOR DMA-0200 FOR VW 1.6 NEW BEETLE (9C, 1C, 1Y) (98-10)Free delivery in 1–3 days£134.78Visit shop →
2x ✅Fits DENSO DMA-0200 MASS AIR FLOW SENSOR ⭐UK Seller⭐Free delivery in 1–3 days£245.89Visit shop →
Denso Dma-0200 Air Mass SensorFree delivery in 1–3 days£129.99Visit shop →
Product Information
Full details
This Denso Air Mass Sensor (DMA-0200) is for vehicle owners seeking a reliable, OE-equivalent replacement for their mass airflow meter. Its key benefit is guaranteed perfect fitment and restoration of optimal engine performance, akin to the original part. A potential caveat is that installation may require specific automotive tools and knowledge.
All features
| Model Part Number | DMA-0200 |
|---|---|
| Brand | Denso |
Extended Product Information
FAQs
What does a Mass Air Flow (MAF) sensor do?
A MAF sensor measures the amount of air entering the engine. This information is sent to the engine control unit (ECU), which uses it to determine the correct amount of fuel to inject for optimal combustion and performance.
Why would I need to replace my MAF sensor?
MAF sensors can become dirty or fail over time. Symptoms of a failing sensor include rough idling, poor acceleration, decreased fuel economy, stalling, and illuminated check engine lights.
Is the Denso DMA-0200 a direct fit replacement?
Yes, the DMA-0200 is designed with OE-equivalent specifications to ensure an exact fit and seamless integration with your vehicle's existing components.
Can I clean the Denso MAF sensor instead of replacing it?
While specialized MAF sensor cleaner sprays exist, it is generally not recommended to clean a MAF sensor unless specifically diagnosed as dirty and repairable. Improper cleaning can easily damage the sensitive sensing elements. Replacing the sensor with a new one like the DMA-0200 is often the most reliable solution.
What is the benefit of using a DENSO part?
DENSO is a leading global automotive component supplier known for its Japanese engineering excellence. Using a DENSO part ensures premium quality, OE-equivalent specifications, and proven reliability, meeting or exceeding original equipment standards.
How long does it take to install the DMA-0200?
Installation time can vary depending on the vehicle, but it is typically a straightforward process that can take anywhere from 15 minutes to an hour for an experienced mechanic.
Troubleshooting
Check Engine Light remains on after installation
Ensure the electrical connector is securely attached and the sensor is properly seated. Clear any existing diagnostic trouble codes (DTCs) with an OBD-II scanner. If the light persists, the MAF sensor may not be the sole cause of the issue, or a new fault may have developed; further diagnosis is recommended.
Engine runs rough or stalls after replacement
Verify that the MAF sensor was installed correctly and that all air intake connections are sealed tightly. Ensure the correct part number was used for the vehicle. An air leak in the intake system post-MAF sensor can cause issues.
Poor engine performance persists (hesitation, low power)
Confirm that the air filter is clean and that there are no blockages in the air intake system. Rule out other potential causes for poor performance, such as fuel system issues or ignition problems, as the MAF sensor may not have been the primary fault.
Pros and Cons
Pros
- Ensures exact compatibility with your vehicle due to OE-equivalent specifications.
- Manufactured to meet or exceed original equipment standards for reliable performance.
- Backed by DENSO's global reputation for automotive excellence and quality.
- Helps restore optimal engine performance by accurately measuring airflow.
- Designed for a perfect fit, simplifying installation.
Cons
- Installation may require specialized automotive tools and technical knowledge.
- As a replacement part, it addresses existing issues rather than adding new functionality.
- Performance is dependent on the correct diagnosis of a faulty Mass Air Flow sensor.
Setup, Compatibility & Care Instructions
Compatibility:
The Denso Air Mass Sensor DMA-0200 is designed as an OE-equivalent replacement. It is crucial to verify compatibility with your specific vehicle make, model, and year before purchase. Consult your vehicle's service manual or a qualified mechanic to confirm that the DMA-0200 is the correct part number for your application.
Setup and Installation:
Installation of a Mass Air Flow sensor typically involves the following steps:
- Safety First: Ensure the engine is turned off and cool. Disconnect the negative battery terminal to prevent electrical shorts.
- Locate the Sensor: The MAF sensor is usually located in the air intake system, between the air filter box and the throttle body.
- Disconnect Electrical Connector: Carefully unplug the electrical connector from the existing MAF sensor.
- Remove Old Sensor: Unscrew or unclip the old MAF sensor from the intake ducting.
- Install New Sensor: Insert the new Denso DMA-0200 into the intake ducting, ensuring a proper seal. Secure it with the appropriate fasteners.
- Reconnect Electrical Connector: Plug the electrical connector firmly into the new MAF sensor.
- Reconnect Battery: Reconnect the negative battery terminal.
- Test: Start the engine and check for proper operation. It may be necessary to clear any existing diagnostic trouble codes (DTCs) using an OBD-II scanner.
*Note: It is highly recommended to have this part installed by a qualified automotive technician if you are not comfortable performing this repair.*
Care:
Mass Air Flow sensors are sensitive components and generally do not require routine maintenance. However, it is important to ensure that the air filter in your vehicle is clean and functioning correctly. A clogged or dirty air filter can restrict airflow and potentially contaminate the MAF sensor.
- **Avoid cleaning the MAF sensor unless specifically instructed by a diagnostic procedure, as incorrect cleaning methods can damage the delicate sensing element.*
- Always use genuine or high-quality aftermarket air filters to protect the intake system and the MAF sensor.