Best current price£35.49from Amazon
Shopping.co.uk recommended and popular offers
Amazon£35.49Visit shop Mirka Backing Pad Net 81x133mm Hook & Loop for Orbital Sanders | Medium hardness backing pad with 46 dust extraction holes for dust-free sanding compatible with Mirka DEOS orbital sanders
Visit shop6 offers from £35.49 - £43.68
View price history by clicking the chart icon.
This Mirka Backing Pad is designed for users of the Mirka DEOS353CV orbital sander, offering enhanced dust extraction and versatility for various sanding tasks. Its medium hardness provides a balance for both flat and curved surfaces, ensuring efficient and clean results when paired with net abrasives. A key caveat is that it is specifically designed for the DEOS353CV model and Hook & Loop abrasives, limiting its compatibility with other sander models or abrasive types.
| Model Part Number | DEOS353CV |
|---|---|
| Brand | Mirka |
No, this backing pad is specifically designed for the Mirka DEOS353CV orbital sander model. It may not fit or function correctly with other Mirka sander models.
This backing pad is designed for Hook & Loop abrasive discs. For optimal dust extraction, it is recommended to use Mirka net abrasives with a compatible hole pattern.
The Pad Saver should be replaced when you notice significant wear, tearing, or if the Hook & Loop surface becomes less effective. This helps protect the main backing pad.
The medium hardness offers a good balance for general-purpose sanding. For extremely aggressive stock removal, a harder pad might be considered depending on the specific application and abrasive used, but this pad is versatile for many tasks.
No, this product is the backing pad and includes one Pad Saver. Abrasive discs are sold separately.
The dimensions of this backing pad are 81 x 133mm.
Ensure the Hook & Loop surfaces on both the disc and the Pad Saver are clean and free from dust or debris. Verify that the Pad Saver is properly seated on the backing pad and that the disc is aligned correctly.
Check that the 46 holes on the backing pad are not blocked by dust or debris. Ensure the abrasive disc also has a compatible hole pattern and that the vacuum hose connection is secure and clear.
Verify that the backing pad is screwed on tightly to the sander's spindle. Inspect the sander's spindle for any damage. Ensure the Pad Saver is correctly attached to the backing pad.
This could be due to an uneven surface on the backing pad or Pad Saver. Inspect both for damage or wear. Ensure consistent pressure is applied during sanding and that the abrasive disc is not worn out.
Setup:
Compatibility:
Care:
