PowerWalker Basic VI 3000 STL uninterruptible power supply (UPS) - PowerWalker - 10121194
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The PowerWalker Basic VI 3000 STL is a Line-Interactive UPS designed for users needing essential power protection against failures and voltage fluctuations without a significant budget impact. Its compact tower form factor, USB connectivity for OS communication, and advanced LCD panel with a multi-functional button offer accessible management. While it provides reliable protection for essential devices, its 1-minute typical backup time at full load means it's best suited for graceful shutdown rather than extended operation during outages.
All features
| Model Part Number | 10121194 |
|---|---|
| Brand | PowerWalker |
Extended Product Information
FAQs
What is the typical backup time for the PowerWalker Basic VI 3000 STL?
At full load (1800W), the typical backup time is approximately 1 minute. At half load (900W), it provides about 3.5 minutes of backup power. This is intended for safe shutdown.
Can I connect sensitive audio/video equipment to this UPS?
This UPS produces a pseudo sine wave output. While suitable for most standard electronics, sensitive audio, video, or medical equipment may perform better with a pure sine wave UPS. Check your equipment's power supply requirements.
How do I mute the UPS alarm?
A quick double-click on the smart multi-functional button on the front panel will mute the audible alarm temporarily.
How long does the battery last and how is it replaced?
The internal battery (12V 7Ah) typically lasts 3-5 years under normal conditions. Replacement should be performed by qualified personnel. The UPS supports up to 4 batteries.
What does 'Line-Interactive' mean for this UPS?
Line-Interactive UPS units monitor incoming power and use a transformer to correct minor voltage fluctuations (like sags and surges) using AVR without switching to battery power. This extends battery life and provides stable power.
Can I control the output of the outlets?
Yes, a long-press of the smart multi-functional button on the LCD panel can be used to control the output of the UPS outlets.
What is the input voltage range for this UPS?
The UPS operates within an input voltage range of 162 V to 290 V.
Troubleshooting
UPS will not turn on
Ensure the power cord is securely connected to the UPS and a working wall outlet. Check if the wall outlet has power using another device. Press and hold the power button for a few seconds.
Audible alarm from the UPS
A continuous alarm typically indicates a power failure or overload. Check if the UPS is connected to mains power. If on battery, consider reducing the connected load. A double-click of the multi-functional button can mute the alarm temporarily.
UPS is not communicating with the computer via USB
Verify the USB cable is securely connected to both the UPS and the computer. Ensure the correct USB port drivers are installed. Restart the computer and the UPS.
Connected equipment not receiving power from UPS
Check if the UPS is turned on and has battery power or mains power. Verify that the connected equipment's power draw does not exceed the UPS's output capacity (1800W). Ensure equipment is plugged into the UPS outlets, not just pass-through outlets if available.
Battery backup time is shorter than expected
Batteries degrade over time. If the UPS is several years old, the battery may need replacement. Ensure the connected load is within the UPS's recommended capacity. Check the battery charge time; it typically takes 8 hours for a full recharge.
Pros and Cons
Pros
- Affordable power protection for essential equipment.
- Compact and space-saving tower design.
- User-friendly LCD panel with multi-functional button.
- USB connectivity for easy OS integration.
- Automatic Voltage Regulation (AVR) for power stability.
Cons
- Short typical backup time (1 min) at full load.
- Pseudo sine wave output may not be suitable for sensitive electronics.
- Limited number of AC outlets (4).
- Noise level of 45 dB might be noticeable in quiet environments.
Setup, Compatibility & Care
Setup:
- Unpack the UPS unit and ensure all accessories are present.
- Connect the UPS power cord to a wall outlet.
- Connect your critical equipment (computer, monitor, etc.) to the Type F AC outlets on the back of the UPS.
- Connect the included USB cable from the UPS to a USB port on your computer.
- Install the PowerMaster software (if desired) from the provided CD or download from the PowerWalker website for advanced monitoring and control.
- Press the power button on the front panel to turn on the UPS.
Compatibility:
- Operating Systems: Compatible with most operating systems via USB HID support (Windows, macOS, Linux).
- Connected Equipment: Suitable for devices with a combined power draw not exceeding 1800W (100% load) or 3000VA.
- Input Frequency: Supports both 50 Hz and 60 Hz input frequencies.
Care and Maintenance:
- Cleaning: Wipe the exterior with a soft, dry or slightly damp cloth. Avoid using solvents or abrasive cleaners.
- Ventilation: Ensure the vents are clear of obstructions to allow for proper cooling. Do not place the UPS in an enclosed space.
- Battery: The internal 12V 7Ah battery has a finite lifespan. For optimal performance, replace the battery every 3-5 years, or when the UPS indicates a battery issue. The UPS can support up to 4 batteries.
- Environment: Operate the UPS within the specified temperature range (0-40 °C) and humidity range (0-90% non-condensing).