Best current price£7.37from Amazon
Shopping.co.uk recommended and popular offers
Amazon£7.37Visit shop Ab Tools 1/4" X 28 Unf Pitch Taper First Tap Thread Cutter Cutting Repair Tungsten Steel
Visit shop16 offers from £7.37 - £14.49
View price history by clicking the chart icon.
This AB Tools Taper First Tap Thread Cutter is designed for professionals and DIY enthusiasts needing to create or repair right-hand threads, specifically 3/4" X 16 UNF. Its taper design facilitates easy thread starting and distributes cutting force effectively, making it suitable for a wide range of materials. A key benefit is its durable tungsten steel construction, ensuring longevity. However, users should note that this is a *taper tap*, intended for starting threads, not for cutting a full thread depth in one pass.
| Model Part Number | 3/4" X 16 UNF |
|---|---|
| Brand | AB Tools |
A taper tap (like this one) has a chamfered end (usually 6-8 threads) that helps it start easily and distribute cutting force. A plug tap has a much shorter chamfer (2-3 threads) and is used after a taper or intermediate tap to finish the thread.
No, this is a *taper* tap, designed primarily to start a thread. For full thread depth, you would typically follow up with an intermediate tap and then a plug tap, or use a plug tap if the material is soft and the hole is already well-started.
This tap is suitable for a variety of materials, including steel, aluminum, and copper. Performance may vary based on material hardness and proper use of cutting fluid.
Generous application of a suitable cutting fluid or lubricant is recommended. This cools the tap and workpiece, reduces friction, and helps clear chips, leading to cleaner threads and longer tool life.
It specifies the thread size: 3/4 inch nominal diameter, 16 threads per inch (TPI), and the Unified National Fine (UNF) thread standard. This is a common coarse thread size for larger fasteners.
After use, clean the tap thoroughly with a stiff brush to remove all metal chips and residue. Dry it completely and apply a light coating of oil to prevent rust during storage.
Ensure the pilot hole is the correct size and deburred. Verify the tap is started perfectly perpendicular to the surface. Use adequate lubrication and apply steady pressure.
This usually occurs from excessive force, lack of lubrication, or not backing the tap out to clear chips. Ensure you are using cutting fluid and backing the tap out frequently, especially in harder materials.
Check for sufficient lubrication. Ensure the tap is sharp and not worn. If using on a machine, verify spindle speed is appropriate; too fast can lead to poor finish.
Setup: Ensure the workpiece is securely held. The tap should be started perpendicular to the surface. Apply cutting fluid or lubricant generously to the tap and the workpiece before and during the tapping process. Rotate the tap clockwise to cut the thread, applying steady, even pressure. Back the tap out periodically (a quarter to half turn counter-clockwise) to clear chips and prevent binding.
Compatibility: This tap is specifically designed for 3/4" X 16 UNF (Unified National Fine) right-hand threads. It is compatible with a wide range of materials including steel, aluminum, and copper.
Care: Clean the tap thoroughly after each use with a brush to remove any metal shavings and residue. Apply a light coat of oil to prevent rust and corrosion. Store in a dry place, preferably in its original packaging or a protective case.
