Deck-Tite Pozi Screw - Green - 4.5 x 50mm

Ideal for pressure treated timber, decking, fencing, sheds, Minimum damage on insertion. Net-Coat ...

Best current price£15.98from Travis Perkins

All Offers

2 offers from £15.98 - £24.98

View price history by clicking the chart icon.

Travis PerkinsDeck-Tite® 4.5 x 50mm Outdoor Screw Pozi Countersunk Net-coat Green Plated Qty 200
£30.00 delivery
£15.98
Visit shop

Product Information

Full details

This guide is for anyone using Deck-Tite Pozi Screws for decking, fencing, or shed construction. The primary benefit is a secure, long-lasting hold due to its unique thread design and corrosion resistance. Keep in mind that while designed for ease of use, proper pilot holes are sometimes still recommended for certain hardwoods.

All features

ColourGreen
Model Part NumberTFDT08200
BrandDeck-Tite

Extended Product Information

FAQs

What is Net-Coat protection?

Net-Coat is a special treatment applied to the screws to provide high corrosion resistance and protect against the chemicals in treated timber.

Do I need to pre-drill before using Deck-Tite screws?

Pre-drilling is recommended for hardwoods or when working near the edge of the wood to prevent splitting.

What is the Tri-Lock thread?

The Tri-Lock thread has three flats that expand the wood while the screw is driven in. Then, the wood relaxes back around the screw, preventing loosening.

Are Deck-Tite screws suitable for exterior use?

Yes, Deck-Tite screws are specifically designed for outdoor applications, including decking, fencing, and sheds.

What size Deck-Tite screws are available?

The product includes 4.5 x 50mm size. Other sizes may be available from the manufacturer.

What is DeckMark accreditation?

DeckMark accreditation ensures the screws meet the quality and performance standards set by the TDCA.

How do I remove a Deck-Tite screw?

Use a pozi-drive screwdriver and apply sufficient torque to unscrew it. If the head is stripped, use a screw extractor tool.

Troubleshooting

Screw head stripping during installation.

Ensure the correct size pozi-drive bit is used and apply even pressure. Pre-drilling may be necessary, particularly in dense wood.

Screw not going in easily.

Pre-drill a pilot hole. Check the alignment and ensure no obstructions are present.

Screw appears loose after installation.

Ensure the screw is fully driven and the Tri-Lock thread is engaged. If needed, remove the screw and re-install, or consider using a slightly longer screw.

Pros and Cons

Pros

  • Durable and long-lasting due to Net-Coat corrosion protection.
  • Secure hold that prevents loosening over time.
  • Minimizes timber damage during installation.
  • Fast and efficient installation with a single coarse thread.
  • Suitable for various outdoor applications, including decking and fencing.

Cons

  • May require pilot holes in some hardwoods for optimal performance.
  • The green color may not match all decking materials.
  • Specific size (4.5 x 50mm) may not suit all project requirements.
  • Not suitable for use with non-treated timber.

Setup, Compatibility & Care

  1. Preparation: Ensure the timber is properly aligned and pre-drilled if necessary, particularly with hardwoods.
  2. Installation: Use a pozi-drive screwdriver or drill with a suitable bit. Drive the screws straight into the timber until the head is flush with the surface. Avoid over-tightening.
  3. Compatibility: Deck-Tite screws are designed for use with pressure-treated timber. Ensure compatibility with the specific type of wood used in your project.
  4. Care: No specific maintenance is required. However, periodically inspect the screws for any signs of damage or loosening, especially in high-traffic areas or areas exposed to the elements.

Similar items

Price History

DatePrice
Visit shop