12mm socket with 16.5mm outer diameter. Part of Laser kit 7032. 120 mm long.
Best current price£11.55from eBay
Shopping.co.uk recommended and popular offers
eBay£11.55Visit shop Laser Tools Extra Deep Socket 3/8""D 12mm - 60773
Visit shop5 offers from £11.55 - £15.32
View price history by clicking the chart icon.
This 12mm extra deep socket from Laser is designed for mechanics and DIY enthusiasts needing to access fasteners in confined or deep-reaching spaces. Its primary benefit is the extended length, allowing for easier engagement with recessed nuts and bolts. A potential caveat is its specialized nature, meaning it may not be a daily driver for all tasks.
| Model Part Number | 60773 |
|---|---|
| Brand | Laser |
The primary advantage is its extra-deep design and 120mm length, which allows access to fasteners located in deep or difficult-to-reach areas.
This socket is designed for a 1/2" drive tool, such as a ratchet or breaker bar.
It is suitable for any standard 12mm hex nut or bolt head. Its extra depth is most beneficial for recessed fasteners.
A smaller outer diameter, relative to its depth, means it can fit into tighter spaces around the fastener, which is often crucial in automotive applications.
Yes, as long as your ratchet has a 1/2" drive connection, it is compatible with this socket.
The socket is 120mm long.
Yes, it is part of the Laser kit 7032.
Verify that you are using the correct 12mm socket size. Ensure the fastener is not damaged or rounded.
Ensure you are using the full 120mm length of the socket. If necessary, use appropriate extensions with your drive tool.
Check that the socket is fully seated on the fastener head. Ensure the fastener is not stripped or worn, and that the socket itself is not damaged.
Clean the socket thoroughly with a light oil or rust remover. Dry completely and store in a dry environment. Regular cleaning after use is recommended.
Setup: This socket requires a compatible drive tool such as a 1/2" drive ratchet or breaker bar. Ensure the drive tool is securely attached to the socket before applying force.
Compatibility: The 12mm socket is designed for metric fasteners. Its 1/2" drive interface makes it compatible with most standard ratchets and extensions. It is listed as part of Laser kit 7032, suggesting potential synergy with other tools in that set.
Care: To maintain performance and longevity, clean the socket after each use with a dry or slightly damp cloth to remove grease and debris. Store in a dry place, preferably in a tool chest or its original packaging, to prevent rust and corrosion. Avoid using abrasive cleaners.
