Infinity Wax Medium Cut Compound Polish - 250mL

It is designed to remove moderate paint defects such as light to medium swirl marks, minor scratches, water spots, and oxidation.

While a new car might not have defects, this compound can be used to enhance gloss and clarity if desired. However, for new paint, a less aggressive polish is often recommended unless defects are present.

It is recommended to use medium-cut foam pads or microfiber cutting pads with a machine polisher. For hand application, a foam applicator pad is suitable.

It is a medium cut compound, capable of single-stage correction for moderate defects. For very fine finishes or heavy defects, a follow-up finer polish or finishing step may be beneficial.

Start with a small amount, approximately a quarter-sized drop for machine polishing a 2'x2' section. Adjust as needed based on pad type and paint condition.

When stored correctly in a sealed container away from extreme temperatures and direct sunlight, the product should maintain its efficacy for several years.

This compound is intended for use on gloss finishes. Using it on matte paint may alter the finish. Always test in an inconspicuous area first.

Reduce pressure, slow down machine speed, or ensure abrasives have fully diminished. Consider a final polish with a finer compound or polish.

Work in smaller sections, use slightly less product, or apply in cooler conditions. A light mist of water or detail spray can help if it dries prematurely.

Ensure the correct applicator pad is being used. Increase pressure slightly or increase machine speed. Verify the product is not old or has not been stored improperly.

Use a clean, plush microfiber towel. If residue is stubborn, a damp microfiber towel can help lift it, followed by a dry wipe.