Nikon Lens Hood - HB-25
Best current price£33.99from Wex Photo Video
Best offers
Shopping.co.uk recommended and popular offers
Wex Photo Video£33.99Visit shop Nikon HB-25 Lens Hood for 24-120mm f/4G AF-S VR Lens
Visit shopWex Photo Video£33.99Visit shop One Offer
1 offer from £33.99
View price history by clicking the chart icon.
Wex Photo VideoNikon HB-25 Lens Hood for 24-120mm f/4G AF-S VR Lens
£3.99 delivery
£33.99
Visit shop
Product Information
Full details
The Nikon HB-25 Lens Hood is designed for photographers using specific Nikon lenses, such as the 24-120 f4G AF-S VR and 24-85mm f/2.8-4.0 D-AF Zoom Lens. Its primary benefit is to significantly reduce glare and improve image contrast by blocking stray light. A potential caveat is its specific compatibility, requiring users to ensure it matches their lens model.
All features
| Brand | Nikon |
|---|
Extended Product Information
FAQs
What lenses is the Nikon HB-25 hood compatible with?
The HB-25 is specifically designed for lenses such as the Nikon 24-120mm f4G AF-S VR and the 24-85mm f/2.8-4.0 D-AF Zoom Lens. Always confirm compatibility with your specific lens model.
Can I use the HB-25 hood with other Nikon lenses?
No, the HB-25 is a dedicated bayonet-mount hood. Using it on incompatible lenses may result in poor fit, vignetting, or inability to attach it properly.
Does the lens hood help protect the lens?
Yes, the hood extends beyond the front of the lens, offering physical protection against accidental bumps and impacts.
How do I clean the lens hood?
Use a soft, dry microfiber cloth for routine cleaning. If needed, a slightly damp cloth can be used, followed by drying. Avoid solvents or abrasive cleaners.
Will the petal shape cause vignetting?
The petal shape is engineered to maximize shading for the specific focal length of the compatible lens while minimizing vignetting. Some minimal vignetting might occur at the extreme wide end on certain lenses.
Can I reverse the hood for storage?
The HB-25 is not designed to be reversed for storage. Attaching it in the reversed position can obstruct the zoom or focus rings and is not recommended.
Troubleshooting
Hood does not attach or lock securely.
Verify that you are using the correct lens model compatible with the HB-25. Ensure the mounting grooves on the lens and hood are clean and free of debris. Realign the hood carefully and attempt to lock it again.
Hood causes slight vignetting at the widest focal length.
Confirm the hood is correctly oriented and fully locked. While the petal design minimizes this, some very slight vignetting can occur on certain wide-angle lenses. If it persists, try removing the hood or using it at a slightly longer focal length.
Scratches or damage to the hood's exterior.
Minor scratches can be left as cosmetic wear. For significant damage, replacement may be necessary. Clean gently with a soft cloth. Avoid dropping or rough handling.
Pros and Cons
Pros
- Effectively reduces lens flare and improves image contrast.
- Provides physical protection to the front of the lens.
- Designed for a specific, secure fit on compatible Nikon lenses.
- Lightweight and compact petal design.
- Helps prevent accidental damage to the lens.
Cons
- Only compatible with specific Nikon lens models (HB-25 designation required).
- Can add bulk to the lens setup.
- May not be suitable for all shooting conditions if direct light is desired.
- Requires careful alignment for secure attachment.
Setup, Compatibility & Care
Compatibility: This lens hood is specifically designed for the Nikon HB-25 mount. Ensure your lens model is listed as compatible before purchase. The primary lenses include the Nikon 24-120mm f4G AF-S VR and the 24-85mm f/2.8-4.0 D-AF Zoom Lens. Check your lens documentation for confirmation.
Setup: To attach the lens hood, align the mounting points on the hood with the corresponding slots on the front of the lens. Gently push the hood inward and rotate it clockwise until it locks securely into place. The petal shape should be oriented correctly for optimal shading.
Care: Clean the lens hood regularly with a soft, dry microfiber cloth. For stubborn smudges, lightly dampen the cloth with water or a lens cleaning solution. Avoid using abrasive materials or harsh chemicals, which can damage the plastic surface. Store the hood properly when not in use to prevent scratches.