Wetwall Sealant - Pewter Grey

The Wetwall Pewter Grey Sealant is used to create a waterproof and seamless seal between shower wall panels and trims, preventing water damage and mold growth.

While the sealant can be used with other panels, it is specifically designed and color-matched for the Mermaid Elite range.

Clean the sealant with mild soap and water. Avoid abrasive cleaners or solvents, as these can damage the sealant.

The sealant typically requires 24-48 hours to cure fully. Refer to the product instructions for specific curing times.

You will need a caulking gun, and a smoothing tool or wet finger for a professional finish.

You can use a sealant remover tool or a utility knife to carefully remove the old sealant. Ensure the surface is clean before applying new sealant.

Yes, this sealant offers antifungal protection to prevent mold and mildew growth.

Product instructions are typically found on the sealant tube or packaging. You can also often find them on the manufacturer's website.

Ensure the surface is clean, dry, and free of old sealant. Apply the sealant in a continuous bead and smooth properly.

Double-check that you're using the correct Pewter Grey sealant for your panels. Ensure the sealant is from the same batch to avoid slight color variations.

Ensure the joint is within the sealant's movement capability. Extreme temperature fluctuations can cause cracking; avoid direct sunlight during curing.