Beko Fridge Freezer - White - E

No, this appliance is not designed for use in unheated outbuildings. Operating it in temperatures below its recommended range can damage both your food and the appliance, and may void your warranty.

The doors are reversible, but it is highly recommended to have a qualified installer or a professional service carry out the door reversal to prevent damage and ensure proper function.

No, the Beko CFG4501W features frost-free technology, which prevents ice from building up, so manual defrosting is not required.

The dimensions are H:2010mm x W:540mm x D:600mm. Please ensure your space has adequate clearance for installation and ventilation.

This model has an 'E' energy efficiency rating.

It offers a total capacity of 286 liters, with 153 liters for the fridge compartment and 133 liters for the freezer compartment.

The noise level for this model is rated at 39dB.

Check if the power plug is securely inserted. Ensure the temperature settings are correctly adjusted. Confirm the door is closing completely and not left ajar. Avoid placing hot food directly into the fridge freezer, and do not overload the compartments, as this can impede air circulation.

Verify that the appliance is level on the floor, as uneven surfaces can cause vibrations. Ensure no items inside are touching the back wall or each other. Normal operational sounds include humming from the compressor and gurgling from the refrigerant.

This could indicate a blocked drain hole. Locate the small drainage hole at the back of the fridge compartment (usually above the crisper drawers) and gently clear any obstructions with a soft pipe cleaner or cotton bud. Also, ensure the appliance is not operating in an unheated environment.

First, ensure the appliance has power. If other functions are working, the LED light may need replacement. This is usually a service job; consult a qualified technician or Beko customer service.

Check if any food items or containers are obstructing the door's closure. Inspect the door seals (gaskets) for dirt, damage, or wear. Clean the seals if dirty. If damaged, seals may need to be replaced by a service technician.