This kenable outdoor networking cable features a copper coated aluminum (CCA) core, making it idea...This kenable outdoor networking cable features a copper coated aluminum (CCA) core, making it ideal for network signals. Designed with 24AWG twisted pairs, it is suitable for both indoor and outdoor use. Its PE sheath provides UV resistance, preventing erosion over time and ensuring durability. The Cat5e cable is also waterproof and can be buried underground. It has been FLUKE TESTED at 60m to ensure it meets performance standards, including resistance (ohms), insertion loss margin (dB), and frequency (MHz). This Cat 5e CCA Outdoor Cable has a PE Sheath with 4 x pairs (8 wire) and conforms to ISO/IEC 11801 and ANSI/TIA/EIA-568C.2 standards. It is approximately 5mm thick and UV resistant with a CPR rating of Fca for outdoor use. This cable requires 5mm cable clips. Please note that CCA cable (copper coated aluminum) cannot carry power and is not suitable for CCTV or POE installations; for such applications, a full copper cable is required.
This 50m Cat5e outdoor networking cable from Kenable is designed for reliable network signal transmission in challenging environments. Its key benefit is durability and weather resistance for outdoor installations, but a key caveat is that its Copper Clad Aluminum (CCA) core means it cannot be used for Power over Ethernet (PoE) or CCTV applications. This guide covers its features, setup, and use.
All features
Series
Cat5e
Model Part Number
009093
Brand
kenable
Extended Product Information
FAQs
Can this cable be used for Power over Ethernet (PoE)?
No, this cable uses a Copper Clad Aluminum (CCA) core, which is not suitable for carrying power and cannot be used for PoE installations. For PoE, a full copper cable is required.
Can this cable be buried underground?
Yes, this cable is waterproof and designed with a durable PE sheath, making it suitable for underground burial.
What is the maximum recommended length for this Cat5e cable?
While Cat5e standard generally supports up to 100 meters for data transmission, it is FLUKE TESTED at 60m. For CCA cables, maintaining optimal performance might be best kept within these tested parameters or shorter, especially if signal degradation is a concern.
What is the difference between CCA and full copper cable?
CCA cable has an aluminum core coated with copper, making it lighter and cheaper. Full copper cable has a solid copper core, offering better conductivity, signal integrity, and the ability to transmit power (essential for PoE).
How do I attach this cable to a wall or surface?
This cable requires specific cable clips. The product information indicates it requires 5mm or 6mm cable clips, depending on the specific measurement or version referenced.
What network speeds does Cat5e support?
Cat5e is capable of supporting Gigabit Ethernet speeds (up to 1000 Mbps), depending on the overall quality and configuration of your network.
Is this cable suitable for CCTV cameras?
No, this CCA cable cannot carry power and is not suitable for CCTV installations that rely on power transmission through the Ethernet cable (PoE). A full copper cable is necessary for such applications.
Troubleshooting
No network connectivity
Verify cable termination at both ends. Check that the cable is not damaged and that all 8 wires are correctly connected. Ensure the network switch and router ports are functioning.
Slow network speeds
Confirm that the network infrastructure (router, switch, devices) supports Gigabit speeds. Check for physical damage to the cable or excessive length beyond recommended limits for CCA. Ensure proper termination.
Cable fails FLUKE testing
Inspect the cable for any signs of physical damage, crushing, or cuts. Re-terminate the cable ends, ensuring correct wire pairing and solid connections. CCA cables can be more susceptible to damage than solid copper.
CCA cable not powering PoE device
This is expected behavior. CCA cable cannot transmit power. Use a dedicated power supply for the device or switch to a full copper cable (e.g., Kenable QS: 008535) if PoE is required.
Pros and Cons
Pros
Durable PE sheath for UV and weather resistance.
Suitable for underground burial.
FLUKE TESTED for performance assurance.
Cost-effective CCA construction for data signals.
Supports Gigabit networking speeds.
Cons
Cannot be used for PoE or CCTV installations due to CCA core.
Requires specific cable clips (5mm or 6mm depending on source).
CCA cable is not as robust as pure copper for long-term signal integrity or power transmission.
Limited to 50m length on this reel.
Setup, Compatibility & Care
Setup:
Unreel the cable, ensuring it is not excessively strained.
Install using appropriate 5mm or 6mm cable clips for secure fastening.
Terminate the cable ends using RJ45 connectors suitable for Cat5e UTP cable, or connect to patch panels and wall outlets. Note: For optimal performance and compatibility with certain faceplates, using full copper cables is recommended for terminations.
Compatibility:
Network Standards: Compatible with Cat5e Ethernet standards, supporting speeds up to 1000 Mbps (Gigabit Ethernet).
Not Compatible With: Power over Ethernet (PoE) devices, CCTV systems requiring power transmission, or applications demanding full copper core reliability.
Care:
The PE sheath offers UV and water resistance. Avoid sharp bends or kinks that could damage the internal conductors.
If burying underground, ensure the cable is laid in a way that prevents physical damage from digging or ground movement.
Keep connectors clean and protected from direct water ingress where possible.