Best current price£124.02from B&Q
Shopping.co.uk recommended and popular offers
B&Q£124.02Visit shop B&Q - 4 Port Underfloor Heating Manifold With Pipe Connections Copper 15mm X 3/4 Ball Valves With Thermometers Psw Tradesuppliers Ltd
Visit shop14 offers from £124.02 - £125.00
View price history by clicking the chart icon.
This 4 Port Underfloor Heating Manifold from Wärmer System is designed for homeowners and installers seeking efficient and customizable heating distribution. Its key benefit is the ability to control multiple heating zones independently, allowing for precise temperature management and energy savings. A potential caveat is that installation requires a basic understanding of plumbing systems and underfloor heating configurations. The manifold is pre-mounted for quick assembly and features a durable brass construction with integrated air vents, thermometers, and a pressure gauge.
| Model Part Number | E102W+(D7*6)+(E128+E129) |
|---|---|
| Brand | Wärmer System |
The manifold features 3/4 inch thread connections for compatibility with euro cones.
No, this is a manifold unit only. You will need to purchase compatible pipes and euro cone fittings separately.
This is a 4-port manifold, meaning it can control up to four separate underfloor heating zones.
The ball valves control the flow of water to each zone. The integrated thermometers allow you to visually monitor the water temperature entering or leaving each zone.
Use the integrated filling/drain-off valve. Connect a hose to the valve's outlet and open it to drain the system.
Installation requires basic plumbing knowledge and familiarity with underfloor heating systems. If you are unsure, it is recommended to hire a professional installer.
The manifold body is constructed from durable brass.
Check that the corresponding ball valve on the manifold is fully open. Ensure there are no airlocks in the loop by using the air vent. Verify the temperature setting for that specific zone if a thermostat is used.
Turn off the water supply. Tighten the leaking connection slightly. If the leak persists, disassemble the connection, check the seal or O-ring, and reassemble securely.
Check the pressure gauge. If low, use the filling/drain-off valve to add water to the system until the recommended pressure is reached. Check for any leaks that may have caused the pressure drop.
Open the automatic air vent to release trapped air. You may need to top up the system pressure after venting.
Setup: The manifold comes pre-mounted on a bracket. Connect your main water supply to the inlet and the four underfloor heating loops to the outlet ports using appropriate 3/4 inch euro cone fittings. Ensure all connections are secure to prevent leaks. The installation bracket allows for wall mounting. Configure the manifold for left or right-hand supply by adjusting its position as needed. Purge air from the system using the automatic air vent.
Compatibility: The 3/4 inch thread connections are designed to work with standard euro cone fittings commonly used with underfloor heating pipes. It is compatible with most hydronic underfloor heating systems.
Care: Regularly check the pressure gauge to ensure it is within the recommended operating range for your heating system. Periodically test the automatic air vent to ensure it is functioning correctly. Clean any dust or debris from the manifold surface with a dry or slightly damp cloth. Avoid using abrasive cleaners.
