Best current price£76.95from wilko
Shopping.co.uk recommended and popular offers
wilko£76.95Visit shop Smartseal Masonry Paint - Exterior Textured Wall Coating - 10L - Soft Apricot
Visit shop
B&Q£109.95Visit shop - Smartseal Wall Coating Textured (Soft Apricot)Waterproof 15 YearsBrickworkStoneConcrete And RenderBreathable10Kg
Visit shop4 offers from £76.95 - £109.95
View price history by clicking the chart icon.
The Smartseal Climashield Textured Wall Coating is designed for homeowners and contractors seeking a durable, long-lasting finish for exterior and interior masonry walls. Its key benefit is providing up to 15 years of protection with superior crack-bridging and waterproofing capabilities. A potential caveat is its thick viscosity, which may require careful application on very smooth surfaces.
| Colour | Yellow |
|---|---|
| Model Part Number | 5061002785482 |
| Brand | Smartseal |
The Climashield Textured Wall Coating is designed to provide up to 15 years of protection.
Yes, it is suitable for both exterior and interior masonry walls and ceilings.
It can be applied to brickwork, stone, concrete, and rendered walls.
Yes, it is a solvent-free, non-toxic, water-based paint with low odour.
The finish is washable and can be cleaned using a damp cloth or sponge with mild detergent.
Yes, the coating has crack-bridging properties and helps to fill small cracks in the substrate.
A breathable finish prevents moisture from getting trapped within the walls, which helps to prevent internal damp and condensation build-up.
Ensure the surface was properly prepared and free from contaminants. Check that the correct primer was used if necessary, and that the surface was completely dry before application.
Apply the coating in thinner, more uniform coats. Ensure consistent application technique with a suitable roller or brush. Allow sufficient drying time between coats.
This may indicate the coating has not fully cured or that the surface is not sufficiently porous. Ensure adequate drying time has passed and that the substrate is indeed breathable.
Stir the product thoroughly. If still too thick, a very small amount of water may be added according to manufacturer instructions, but avoid over-thinning.
Surface Preparation:
Ensure all masonry surfaces are clean, dry, and free from dust, loose paint, mould, or algae. Power washing may be necessary for heavily soiled areas. Repair any significant cracks or defects before application. For powdery or chalking surfaces, a suitable primer may be required.
Compatibility:
This coating is suitable for application on brickwork, stone, concrete, and rendered walls. It can be used for both exterior and interior surfaces, including walls and ceilings.
Application:
Stir the product thoroughly before use. Apply using a brush or roller. Due to its thick viscosity, a masonry roller or a large brush is recommended. Apply in uniform coats, avoiding over-application. Two coats are typically recommended for best results. Allow adequate drying time between coats as per manufacturer guidelines.
Care:
To clean the finished surface, use a damp cloth or sponge with mild detergent. Avoid abrasive cleaners that could damage the coating.
