Best current price£1.21from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£1.21Visit shop Floplast Anthracite/Grey Solvent Weld Waste Coupling - 40Mm
Visit shop
B&Q£4.47Visit shop B&Q - Anthracite Abs Solvent Coupling 32mm
Visit shop
Amazon£5.51Visit shop FloPlast 32mm Anthracite Grey ABS Straight Coupling
Visit shop10 offers from £1.21 - £7.02
View price history by clicking the chart icon.
The FloPlast Solvent Weld Waste Coupling is ideal for professional plumbers and serious DIY enthusiasts looking for a permanent, leak-proof connection in 40mm waste pipe systems. Its key benefit lies in the chemically fused joint, which provides exceptional durability compared to mechanical fittings; however, it is important to note that once the solvent weld cures, the joint is permanent and cannot be disassembled without cutting the pipe.
| Model Part Number | F-P |
|---|---|
| Brand | FloPlast |
No, solvent weld fittings are designed for chemical bonding and have different tolerances than push-fit fittings. Do not attempt to use them together.
While the anthracite finish is designed to be decorative, the material can be painted if sanded lightly, though it is intended to be used as-is for the best aesthetic.
While it bonds in seconds, it is recommended to leave the joint undisturbed for 15-30 minutes and allow 24 hours for a full, load-bearing cure.
It is manufactured in the UK to BS EN 1455 standards and is officially Kitemarked.
No, the process creates a permanent, fused bond. To remove the pipe, you would need to cut the plumbing section out.
Usually caused by insufficient solvent cement or failure to clean the surfaces. If the joint has already cured, the section must be cut out and replaced.
Check for burrs on the cut end of the pipe or ensure that you are not using a pipe with a thicker wall rating meant for pressure systems.
