Zyxel XGS4600-32 - Layer 3 Managed Gigabit Switch

Bandwidth-intensive applications such as multimedia streaming, VoIP, and video surveillance are us...

Best current price£2,419.00from Laptops Direct (BID)

All Offers

2 offers from £2,419.00

View price history by clicking the chart icon.

Laptops Direct (BID)Zyxel Xgs4600-32 24-Port Layer 3 Managed Stackable Gigabit Switch Black, Laptops Direct - XGS4600-32-ZZ0102F
£6.95 delivery
£2,419.00
Visit shop
Servers Direct (BID)Zyxel Black Xgs4600-32 24-Port Layer 3 Managed Stackable Gigabit Switch
£6.95 delivery
£2,419.00
Visit shop

Product Information

Full details

The Zyxel XGS4600-32 is a Layer 3 managed Gigabit Ethernet switch designed for businesses with bandwidth-intensive applications like multimedia streaming, VoIP, and video surveillance. It offers high availability, advanced L3 routing capabilities, and flexible management options to support complex and growing networks. A key benefit is its ability to handle heavy network traffic efficiently through 10-Gigabit uplinks and stackability, preventing productivity loss. However, it requires a certain level of network administration expertise for optimal configuration.

All features

SeriesXGS4600
Model Part NumberXGS4600-32-ZZ0102F
BrandZyxel

Extended Product Information

FAQs

What is the switching capacity of the XGS4600-32?

The Zyxel XGS4600-32 has a switching capacity of 136 Gbps, allowing it to handle high volumes of network traffic efficiently.

Can this switch be managed remotely?

Yes, the XGS4600-32 supports both Command Line Interface (CLI) and an intuitive Web-based GUI, allowing for flexible remote management.

What are the uplink options for this switch?

The switch features four integrated 10-Gigabit SFP+ slots, providing high-speed uplink capabilities.

Does the XGS4600-32 support Power over Ethernet (PoE)?

No, the XGS4600-32 does not support Power over Ethernet (PoE).

How many devices can be stacked together?

You can stack up to four units or 112 Gigabit ports in a physical stack using the 10-Gigabit SFP+ slots.

What is the warranty period for this product?

Please refer to Zyxel's official website or your reseller for the most current warranty information, as this can vary by region and specific product program.

How do I reset the switch to factory defaults?

Typically, a factory reset can be performed by holding down a reset button (often recessed) for a specific duration while the device is powered on. Consult the product manual for the exact procedure.

Is this switch suitable for small businesses?

While suitable for any business needing robust networking, its advanced L3 features and 10-Gigabit capabilities make it particularly beneficial for medium to large businesses or specific network segments requiring high performance and advanced control.

Troubleshooting

Switch not powering on

Verify the power cord is securely connected to both the switch and the power outlet. Ensure the power outlet is functional by testing with another device. Check if the power supply unit is correctly seated.

No network connectivity on ports

Check the Ethernet cables for damage and ensure they are properly seated on both the switch and the connected device. Verify the status lights on the port indicate a link. Try a different port or cable. Ensure the connected device's network interface is enabled.

Poor network performance or slow speeds

Check for potential network loops. Ensure the switch firmware is up-to-date. Verify that the connected devices are negotiating at the expected speed (e.g., Gigabit). Examine uplink utilization and consider upgrading uplink capacity if saturated.

Cannot access Web GUI or CLI

Ensure you are using the correct IP address and port for the GUI. Verify the device is connected to the network and accessible from your management station. If using CLI, confirm the console cable is properly connected and the terminal emulator settings (e.g., baud rate, data bits) are correct.

Stacking link not establishing

Confirm that compatible stacking cables or transceivers are used. Ensure the stacking ports on all units are enabled in the configuration. Verify the physical connections are secure. Check firmware compatibility across all stacked units.

Pros and Cons

Pros

  • Supports advanced Layer 3 routing for complex network segmentation.
  • High availability features like ring stacking and power redundancy minimize downtime.
  • Offers both CLI and Web GUI management for administrative flexibility.
  • Scalable through physical stacking, allowing for network expansion.
  • Future-proofed with IPv6 support for evolving network needs.
  • Integrated 10-Gigabit SFP+ ports handle high-bandwidth traffic effectively.

Cons

  • Requires skilled network administrators for effective management and configuration.
  • Power redundancy is active-standby, not dual active.
  • Optional direct-attach cables or transceivers are needed for stacking.
  • Does not support Power over Ethernet (PoE).

Setup, Compatibility & Care

Setup:

  1. Rack Mounting: The switch includes a rack mounting kit. Secure the brackets to the switch and then mount it into a standard 19-inch rack. Ensure adequate ventilation.
  2. Connections: Connect network devices to the 24 Gigabit Ethernet ports using standard Ethernet cables. Utilize the four SFP+ slots for high-speed uplinks or for stacking purposes. Connect the console port (RS-232) for initial CLI configuration if needed.
  3. Power: Connect the power cord to the switch and a suitable power outlet. For environments requiring power redundancy, ensure a backup power source is connected.

Compatibility:

  • Networking Standards: Supports a wide range of standards including IEEE 802.1D, 802.1Q, 802.1ad, 802.1p, 802.1s, 802.1w, 802.1x, 802.3, 802.3ab, 802.3az, 802.3u, 802.3x, and 802.3z, ensuring compatibility with most network equipment.
  • Cabling: Supports 10BASE-T, 100BASE-TX, and 1000BASE-T over copper cabling. SFP+ slots are compatible with standard SFP+ transceivers and DAC cables.
  • IPv4/IPv6: Designed for smooth transition from IPv4 to IPv6 networks.

Care:

  • Ventilation: Ensure the operating environment provides adequate airflow around the switch. Operating temperature is 0-50 °C.
  • Cleaning: Clean the exterior with a dry or slightly damp cloth. Avoid using harsh chemicals or solvents. Ensure the unit is powered off before cleaning.
  • Firmware Updates: Regularly check the Zyxel support website for firmware updates to enhance performance and security. Follow the recommended procedures for firmware upgrades.

Price History

DatePrice
Visit shop